SmartNode 4960 Getting Started Guide | C • Cabling |
|
|
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the existing network infrastructure and to third party products.
Console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in figure 10.
The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to volt- age, current, anticipated temperature, flammability, and
CAUTION mechanical serviceability.
120- |
|
|
240V,Power |
|
|
50/60 | Hz, | 0/3 |
|
| 1A |
0/2
| 0/1 |
T1/E1 | 0/0 |
ETH | 0/1 |
ETH | 0/0 |
Reset
Console
Serial Terminal
Note A Patton Model
Figure 10. Connecting a serial terminal
Note See section “Console port” on page 61 for console port
Introduction | 56 |