Polycom 4400 manual Server

Page 11

Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs

4.Under DHCP Information, enter the IP address of the Primary DHCP

Server.

5.Repeat this step for the ap-managerinterface.

6.Click the Apply button and save the changes.

PN: 1725-36070-001_P.doc

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Cisco Trademark Information Certified Product Summary IntroductionKnown Limitations Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Initial setup of the controller is shown below Controller SetupUnder Interface Name click management Connecting APsServer AP Configuration Set Admin Status to Enable 802.11b 70 dBm Mb/s 60 dBm 11 Mb/s 802.11a 45 dBm 54 Mb/s Use the default Fragmentation Threshold 2346 bytes Configuration Guide Set Admin Status to Enable Use the default Fragmentation Threshold 2346 bytes For 802.11a Network Status, click the Enabled check box Setting up the voice Ssid Setting Up the SSIDsPN 1725-36070-001P.doc Configuration Guide Further Assistance
Top Page Image Contents