Polycom 4400 manual Use the default Fragmentation Threshold 2346 bytes

Page 18

Configuration Guide

10.Use the default Fragmentation Threshold (2346 bytes).

11.Set the Beacon Period to 100.

12.Set DTIM Period to 2.

13.SpectraLink Wireless Telephones do not support dynamic power and will not utilize the information element that is set when DTPC support is enabled. Handset power should be configured to match the highest transmit power of the APs.

14.Click the Apply button to save the settings.

18	PN: 1725-36070-001_P.doc

Image 18

Contents Cisco Trademark Information Introduction Certified Product SummaryKnown Limitations Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Controller Setup Initial setup of the controller is shown belowConnecting APs Under Interface Name click managementServer AP Configuration Set Admin Status to Enable 802.11b 70 dBm Mb/s 60 dBm 11 Mb/s 802.11a 45 dBm 54 Mb/s Use the default Fragmentation Threshold 2346 bytes Configuration Guide Set Admin Status to Enable Use the default Fragmentation Threshold 2346 bytes For 802.11a Network Status, click the Enabled check box Setting Up the SSIDs Setting up the voice SsidPN 1725-36070-001P.doc Configuration Guide Further Assistance