Polycom 4400 manual For 802.11a Network Status, click the Enabled check box

Page 19

Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs

15.In the navigation pane under 802.11a/n, select EDCA Parameters.

16.Select Spectralink Voice Priority from the drop-down list.

17.Click the Apply button to save the settings.

18.In the navigation pane under 802.11a /n, select Network.

19.For 802.11a Network Status, click the Enabled check box.

20.Click the Apply button to save the settings.

PN: 1725-36070-001_P.doc

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Cisco Trademark Information Certified Product Summary IntroductionKnown Limitations Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Initial setup of the controller is shown below Controller SetupUnder Interface Name click management Connecting APsServer AP Configuration Set Admin Status to Enable 802.11b 70 dBm Mb/s 60 dBm 11 Mb/s 802.11a 45 dBm 54 Mb/s Use the default Fragmentation Threshold 2346 bytes Configuration Guide Set Admin Status to Enable Use the default Fragmentation Threshold 2346 bytes For 802.11a Network Status, click the Enabled check box Setting up the voice Ssid Setting Up the SSIDsPN 1725-36070-001P.doc Configuration Guide Further Assistance
Top Page Image Contents