Polycom 4400 manual Further Assistance

Page 23

Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs

Further Assistance

1.An installation and configuration guide for the 4400 WLC can be found on Cisco’s website: http://www.cisco.com/en/US/docs/wireless/controller/5.0/co nfiguration/guide/ccg50.html

2.To convert the 1200 series autonomous AP to an LWAPP, go to: http://www.cisco.com/en/US/products/hw/wireless/ps430/ prod_technical_reference09186a00804fc3dc.html

3.For more information on the LWAPP-enabled APs, see Quick Start Guide LWAPP-Enabled Cisco Aironet Access Points at: http://www.cisco.com/en/US/products/hw/wireless/ps430/ products_quick_start09186a00805100f5.html

4.For other assistance, contact either Cisco’s or Polycom’s customer service at:

www.cisco.com or http://www.polycom.com/usa/en/support/voice/voice.html

PN: 1725-36070-001_P.doc

23

Page 22 Page 23
Image 23
Page 22 Page 23
Contents Cisco Trademark Information Certified Product Summary IntroductionKnown Limitations Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Initial setup of the controller is shown below Controller SetupUnder Interface Name click management Connecting APsServer AP Configuration Set Admin Status to Enable 802.11b 70 dBm Mb/s 60 dBm 11 Mb/s 802.11a 45 dBm 54 Mb/s Use the default Fragmentation Threshold 2346 bytes Configuration Guide Set Admin Status to Enable Use the default Fragmentation Threshold 2346 bytes For 802.11a Network Status, click the Enabled check box Setting up the voice Ssid Setting Up the SSIDsPN 1725-36070-001P.doc Configuration Guide Further Assistance
Top Page Image Contents