Polycom 4400 manual Network Topology

Page 5

Cisco: 4400 Series WLC, WiSM and 3750G Integrated WLC with 1100 and 1200 Series APs

Network Topology

The following configuration was tested during VIEW Certification.

It is important to note that this configuration is not necessarily applicable to all customer environments.

SpectraLink 8000

SpectraLink 8000

Telephony Gateway

SVP Server

 

Switch

Cisco 4400 Controller

Cisco 1131

Cisco 1131

SpectraLink 8000

Wireless Telephones

PN: 1725-36070-001_P.doc

5

Image 5
Contents Cisco Trademark Information Certified Product Summary IntroductionKnown Limitations Network Topology Configuring a New Controller Starting from Factory Defaults Connecting to the Controller via a Browser Installing Software Initial setup of the controller is shown below Controller SetupUnder Interface Name click management Connecting APsServer AP Configuration Set Admin Status to Enable 802.11b 70 dBm Mb/s 60 dBm 11 Mb/s 802.11a 45 dBm 54 Mb/s Use the default Fragmentation Threshold 2346 bytes Configuration Guide Set Admin Status to Enable Use the default Fragmentation Threshold 2346 bytes For 802.11a Network Status, click the Enabled check box Setting up the voice Ssid Setting Up the SSIDsPN 1725-36070-001P.doc Configuration Guide Further Assistance