Polycom 3725-24004-001/A manual Enabling and Disabling Automatic Camera Tracking

Page 23

Using the Polycom PowerCam Presenter

Enabling and Disabling Automatic Camera Tracking

Most of the time, you’ll want to keep automatic tracking on so you can freely move about the room without having to manually adjust the camera. However, at times, you may want to manually pan, tilt, and zoom the camera. The Polycom PowerCam Presenter gives you the flexibility to enable or disable automatic camera tracking.

For information about how to manually control the camera, refer to Controlling the Camera Manually on 2-15.

To enable automatic camera tracking:

1.Slide the Power button on the locator pack to the ON position.

The camera remains in the state it was when you last powered off the locator pack. Therefore, if automatic camera tracking was disabled the last time you powered off the locator pack, it will be disabled when you power on the locator pack; if automatic camera tracking was enabled, then it will already be enabled when you power on the locator pack.

2.If automatic camera tracking is disabled, press any of the Presenter View buttons.

To disable automatic camera tracking:

¾Do one of the following:

—Power off the locator pack by sliding the Power button on the top of the locator pack to the OFF position.

— Press Off Off on the remote control.

—Press Preset 1 or Preset 2 on the remote control.

If you are using a VSX video conferencing system with your PowerCam Presenter, automatic camera tracking automatically becomes disabled if the far site controls your camera using Far End Camera Control. You can also disable it by doing one of the following:

•Manually pan, tilt, or zoom the camera or select a preset using either the VSX remote control or VSX Web.

•Use VSX automatic tracking to voice.

2 - 11

Image 23

Contents VideoVoiceDataWeb License Terms Trademark InformationAbout this Guide User’s Guide for the Polycom PowerCam Presenter Contents Maintenance and Troubleshooting Introducing the Polycom PowerCam Presenter Name Component Description System ComponentsTilt, or zoom VSX Series , available at Setting up the Polycom PowerCam Presenter State-of-the-Art Technology Key FeaturesEase of Use Setting up the Hardware Using the Polycom PowerCam PresenterUsing the Remote Control Setting Description Input Signal Configuring User SettingsConfiguring Camera Settings Backlight Compensation Setting Description Camera DirectionRestricted Unrestricted Not Specified Unrestricted Calibrating for Background Noise Calibrating the CameraConfiguring LAN Properties Configuring Video Output Settings Display messages Using Automatic Camera TrackingSetting Description Output On-screen Connected to connector On the controllerEnabling and Disabling Automatic Camera Tracking Setting and Using Presenter Views Using the Polycom PowerCam Presenter Enabling and Disabling Automatic Zooming Controlling the Camera Manually Setting and Using Camera PresetsObtaining System Information Tips on Using the Polycom PowerCam Presenter10’ 15’ 20’ 25’ 30’ 35’ 40’ 45’ 50’ 10’ 15’ 20’ 25’ 30’ 35’ 40’ 45’ 50’ Charging the Locator Pack Batteries Maintenance and TroubleshootingMaintaining the System Upgrading the Software Automatic Camera Tracking SpecificationsSpecification Description Symptom Problem Corrective Action Troubleshooting the SystemPower and Hardware Issues To Composite Set the Input Signal to S-Video Set the Input Signal to CompositeOff Camera Movement IssuesLeft Right Down Automatic camera Camera inputs and outputs Set Screen Saver Wait Time to Off Go to System Admin Settings General SettingsSystem Settings Appearance Set to Restricted orContacting Technical Support User’s Guide for the Polycom PowerCam Presenter Charging Safety and Regulatory NoticesImportant Safeguards Safety Precautions for Lithium Ion Battery PacksSafety Warnings When Using the Battery Safety Warnings When Discharging the Battery License Restrictions Warranty InformationWarranty Information Industry Canada IC Regulatory NoticesPart 15 FCC Rules Safety and Regulatory Notices Plug Acts as Disconnect Device Regulatory Notices Special Safety InstructionsInstallation Instructions Cable camera IndexHardware setting up 2-1troubleshooting Regulatory notices Safety and Regulatory Notices-1 Warranty information Safety and Regulatory Notices-4