SPECIFICATIONS
Output Power2, 3:
2 ohms, 1 kHz, 1% THD
4 ohms, 1 kHz, 1% THD
8 ohms, 1 kHz, 1% THD
(Bridge mode, mono)
4 ohms, 1 kHz, 0.006% THD
8 ohms, 1 kHz, 0.005% THD
Rated Output Power2:
4 ohms, 20 Hz to 20 kHz, 0.1% THD
8 ohms, 20 Hz to 20 kHz, 0.07% THD
Slew Rate3:
Stereo mode, each channel
Bridge mode, mono
Total Harmonic Distortion2, 3:
20 Hz to 20 kHz, @ rated output power, 8 ohms
Input Sensitivity & Impedance4:
@ rated output power, 8 ohms
Dimensions & Weight:
Height
Width
Depth
Weight
Frequency Response2, 3:
±1 dB, 1 W RMS, 8 ohms
±0.2 dB, @ rated output, 8 ohms
Damping Factor2 ,3:
8 ohms, 1 kHz
Hum & Noise2:
Below rated output power, 8 ohms
Power Consumption2:
@ rated output power, 8 ohms
Cooling System:
DDT™ Compression System:
600 W RMS per channel
450 W RMS per channel
270 W RMS per channel
1200 W RMS
900 W RMS
400 W RMS per channel
240 W RMS per channel
20volts per μSec
40volts per μSec
Less than 0.07%
1.0 V RMS (0 dBV)
20 K ohms (32 dB gain)
5.25" (13.3 cm) 19" (48.3 cm) 15" (38.1 cm)
45 pounds (20.5 kg)
10 Hz to 40 Hz
20 Hz to 20 kHz
Greater than 300
100 dB, unweighted
8.6 A @ 120 V AC
Switchable with LED
1 @ 120 V AC, 60 Hz 2 Stereo mode, both channels driven 3 Typical Value 4 Input attenuator set FCW
TM®
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
7