Peavey PV 1200 manual Stereo Mode

Page 8

STEREO MODE

DDT Compression

To left speakersshould be enabled for system protection

TM

To right speakers

 

Mode switch must be

 

 

in stereo position

BRIDGE MODE

 

DDT Compression

System Load

should be enabled for

system protection

4 ohm minimum

 

 

TM

Mode switch must be in bridge position

TWO-CHANNEL MONO MODE

Connect to first

 

 

Connect to second

set of speakers

 

 

 

set of speakers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TM

Mode switch must be in stereo position

Left Output from Mixer

Can be used as outputs to chain to other power amp units

Right Output from Mixer

Output

from Mixer

Not Used

DDT Compression should be enabled for system protection

Output

from Mixer

Connect

Channel A

to Channel B

WARNING!

For optimum performance and reliability DO NOT PRESENT THE AMPLIFIER WITH A SPEAKER LOAD OF LESS THAN 2 OHMS, OR A COMBINATION OF SPEAKERS THAT TOGETHER ARE LESS THAN 2 OHMS!

Using one speaker, it must be rated at 2 ohms minimum.

Using two speakers, they must be rated each at 4 ohms minimum.

Using three speakers, they must be rated each at 8 ohms minimum.

AVIS!

Pour assurer la Fiabilte et obtenit une performance optimale, ne soumette jamais l'amplificateur a une charge d'impedance totale inferieure a 2 ohms, ni avec un H.P. ni en combinaison des H.P.

AVEC un H.P., il Faut une charge d'impedance minimum de 2 ohms.

AVEC deux H.P., il Faut pour chaoun une charge d'impedance minimum de 4 ohms.

AVEC trois H.P., il Faut pour chaoun une charge d'impedance minimum de 8 ohms.

8

Image 8
Contents 1 2 0 Page Power LED Power SwitchG L I S H DDT Active LedsDDT Switch Mode SwitchInput Sensitivity HIGH-Z Input JacksInstallation and Connection Industrial and Commercial InstallationsStudio and Home Installation Bridge ModeDDT Specifications Stereo Mode Tablero Trasero P a Ñ O LFunciones DEL Tablero Frontal DDT Switch Interruptor de DDT Mode Switch Interruptor de modoFunciones DEL Tablero Trasero Input Sensitivity Sensibilidad de entradaSpeaker Outputs Salidas para altavoces Connecteur SecteurInstalación Y Conexión Instalaciones Industriales Y ComercialesDDT Instalación EN Hogares Y EN EstudiosModo DE Puente Panneau Arrière A N Ç a I SCaracteristiques DU Panneau Avant DDT Switch Commutateur DDT Mode Switch Commutateur de modeCaracteristiques DU Panneau Arrière Input Sensitivity Sensibilité d’entréeInstallation ET Connexion Installation Commerciale ET IndustrielleSpeaker Outputs Sorties haut-parleurs Connecteur Secteur CIECompression DDT Installation PERSONNELLE/STUDIOMode Couplé Bridge Rückpla TTE U T S C HBeschreibung DER Frontplatte DDT Switch DDT Schalter Mode Switch ModusschalterInput Sensitivity Eingangsefindlichkeit HIGH-Z Input Jacks Hochohmige EingangsbuchsenConector DE Alimentacion IEC Installation UND AnschlussIndustrielle UND Kommerzielle Installation Installation IM Studio UND ZU Hause ÜberbrückungsmodusPage Peavey ONE-YEAR Limited WARRANTY/REMEDY Important Safety Instructions Features and specifications subject to change without notice