Operating the
Move the position of the PIP by:
•Using the OSD menu (see section 8.1.4)
Choose a new PIP source by:
•Pressing the "PIP Source" button on the remote control transmitter followed by the button of the desired PIP input
•Pressing and holding down the PIP front panel button and then pressing the button of the desired PIP input (while the PIP button is still pressed)
7.5Locking and Unlocking the Front Panel
To prevent accidental changes to settings or unauthorized tampering with the front panel, you can lock the front panel.
To lock the front panel:
•Press and hold the ENTER front panel button1 for about 3 seconds
The front panel buttons are locked2 (except for the ENTER button on the front panel)
The LCD displays: Keypad Lock On
To unlock the front panel buttons (releasing the protection mechanism):
•Press and hold the ENTER front panel button for about 3 seconds
7.6Freezing the Image
To freeze the image, press the Freeze key on the infrared remote control transmitter (see Figure 27) or the FREEZE front panel button.
The image freezes and the FREEZE front panel button illuminates. The LCD displays: Freeze.
You can define the function of the FREEZE button3 via the OSD menu (see Table 16).
7.7 Displaying a Blank Screen
To display a blank screen, press the Blank key on the infrared remote control transmitter (see Figure 27). You can set the blank color to blue or black and also define the function of the Blank key4 via the OSD menu (see Table 16).
1 Does not apply to the ENTER key on the infrared remote control transmitter
2 However, operation via the infrared remote transmitter or
3 Freeze and mute, freeze or mute
4 Blank and mute, blank or mute
26 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |