Kramer Electronics VP-725XLA user manual Define the PIP screen

Configuring and Controlling the VP-725XLA

Setting	Function	Selection/Range	Default
V-Zoom10	Vertical zoom	-8 to 8	0
Zoom	Set the Zoom1	100%, 150%, 200%, 225%, 250%, 275%, 300%,	100%
		325%, 350%, 375%, 400%, Custom
Custom	Set the Zoom	From 0 to 32 (this range is equivalent to 100% to
Zoom2		400%)
Zoom H-Pan3		-16 to 16	0
Zoom V-Pan3		-16 to 16	0
HQV Color	Color saturation	Adjust RGB and CMY4 individually (-100 to 100)
Setting

8.1.4The PIP Screen

Figure 16 and Table 9 define the PIP screen.

Figure 16: PIP Screen

Table 9: PIP Screen Functions

Setting	Function	Selection/Range	Default
On/Off	Activate/deactivate the PIP feature5	On/Off	Off
Type	Select the PIP type	Picture-In-Picture,	Picture-In-Picture
		Picture + Picture6 or Split
PIP Source	Select the PIP source7	See Table 5
PIP Size	Select the PIP size	1/25, 1/16, 1/9, 1/4, or	1/4
		Custom
H-Position	Set the horizontal position of the PIP	0 to 128	3
	on the display

1 The zoom feature is disabled when the aspect ratio is set to custom or when the PIP feature is on 2 This function is available after setting the Zoom to custom

3 Not available if the zoom is set to 100%

4 CMY means Cyan, Magenta and Yellow

5 When PIP is activated and that input is not connected, the PIP window will appear black. If the zoom function is ON, the OSD prompts “cancel zoom?"

6 Maintains the aspect ratio

7 When changing the PIP source, the display fades through black

31