Kramer Electronics VP-725XLA user manual Input Screen Input Screen Functions

Configuring and Controlling the VP-725XLA

8.1.1The Input Screen

Figure 13 and Table 6 define the Input screen.

Figure 13: Input Screen

Table 6: Input Screen Functions

Setting	Function	Selection/Range	Default
Select	Select the group	Video Group, Scaler	Scaler
VGA Group	Select the VGA input1	From 1 to 4	VGA 1
HDMI Group	Select the HDMI input1	From 1 to 4	HDMI 1
Comp Group	Select the Comp input1	From 1 to 4	Comp 1
YC Group	Select the YC input1	From 1 to 4	YC 1
CV Group	Select the CV input1	From 1 to 4	CV 1
Scaler	Select the source to scale	From VGA 1 to VGA 4; from HDMI 1 to HDMI 4;	VGA 1
	(in the Scaler operation mode)	from COMP 1 to COMP 4; from YC 1 to YC 4;
		from CV 1 to CV 4, and USB
Image Name	Shows the file name2 that is displayed when the USB port is connected
Color Format	Select the color format	Auto, RGB or YUV	Auto
Video	Select the video standard	Auto, NTSC, PAL, PAL-M, PAL-N, NTSC 4.43,
Standard		SECAM or PAL-60
H-Position	Set the horizontal position3	The range changes according to the input mode	Auto
V-Position	Set the vertical position	The range changes according to the input mode
Frequency	Adjust the frequency4	The range changes according to the input mode
Phase	Adjust the phase	0 to 31	0
Auto image	Assesses the image and improves the quality accordingly, by automatically
	adjusting the phase, frequency and position. Upon completion, the relevant
	OSD values are updated (Hpos, Vpos, Phase and Frequency)

1 In the Video Group operation mode

2 Supports JPEG format only. The JPEG file should not exceed a resolution of 2048x1536. If the image file is not within the definition a blank screen appears and the machine displays the message: "File too big" or "File too small" (smaller than 320x240)

3 For UXGA and component video inputs

4 For UXGA inputs

28 KRAMER: SIMPLE CREATIVE TECHNOLOGY