Kramer Electronics VP-725XLA user manual Switching an Input to an Output

Operating the VP-725XLA Presentation Switcher / Scaler

7.2 Switching an Input to an Output

This section describes how to switch an input to an output when the VP-725XLAoperates as five independent switchers (see section 7.2.1) and when it functions as a scaler (see section 7.2.2).

To switch an input to an output you have to first select the operating mode via the SELECT button and then select the desired inputs via the INPUT SELECTOR buttons.

7.2.1Switching the VP-725XLA as Five Independent Switchers

When operating the VP-725XLAas five independent switchers, the selected input in each group is switched to the output of that group.

To operate the VP-725XLAas five independent video switchers1:

1.Press the VIDEO GROUP button1.

Only the VIDEO GROUP button illuminates.

2.Press an input button to switch to the output for each of the five independent switchers. For example, in the:

UXGA group, press INPUT 1

HDMI group, press INPUT 12

CV group, press INPUT 2

YC group, press INPUT 3

COMP group, press INPUT 4

To operate the VP-725XLAas five independent audio-video switchers:

1.Press both the VIDEO GROUP and the AUDIO GROUP buttons. Both buttons illuminate.

2.Press an input button to switch to the output for each of the five independent switchers.

The Audio follows the video.

7.2.2Switching the VP-725XLA as a Scaler

To operate the VP-725XLAas a scaler, press the SCALER button3 and then switch one of the 21 inputs to the scaled video outputs. If you also press the MASTER AUDIO button, the audio follows the scaled video output.

1 Alternatively, press the AUDIO GROUP button to switch the audio signal only

2 The HDMI Group Output is momentarily lost during switch transitions in the unit 3 The button illuminates

22 KRAMER: SIMPLE CREATIVE TECHNOLOGY