User Manual | English |
Introduction
Thank you for purchasing the LINDY KVM Extender SMART. The KVM Extender SMART allows you to control your PC, server or KVM switch from a keyboard, mouse and monitor at distances of up to approximately 150 metres (500 feet) away using low cost CAT5 or higher cable.
The KVM Extender SMART consists of a Transmitter (Local) unit and a Receiver (Remote) unit. The Transmitter connects to a computer or KVM switch. The Receiver unit is located at a remote location and connects to a keyboard, monitor and mouse console. The KVM Extender SMART converts the PS/2 and VGA signals into a signal that can be transmitted over inexpensive CAT5 Ethernet cable.
The KVM Extender SMART is ideal for network managers and system administrators – a workstation can be connected to the Receiver unit allowing the operator to work on his computer or remotely on the KVM switch. Additionally, a local console can be connected to the Transmitter unit for direct access to the KVM switch. Both local and remote consoles can access the servers connected to the KVM switch simultaneously, governed by a short timeout.
Using the KVM Extender SMART to remotely access a computer:
Remote
Operators PC
Remote Console
Remote Receiver | Up to 150m |
|
Using the KVM Extender SMART to remotely access a KVM Switch:
Remote
Operators PC
Remote Console
Remote Receiver | Up to 150m |
| |
|
|
Local Computer
Local Console
Local Transmitter
Local Console
Local
Transmitter
KVM Switch
1