Kenwood TK-3200, TK-2200 instruction manual Thank YOU

Page 2

THANK YOU

We are grateful for your purchase of this KENWOOD product and welcome you to the Business Radio Service (BRS).

Your KENWOOD 2-way Business Radio is called a “transceiver”, meaning “transmitter & receiver”. We believe this easy-to-use transceiver will provide you with dependable and reliable communications. This KENWOOD transceiver is a precision device. Treat it with care, and you will enjoy years of reliable operation.

MODELS COVERED BY THIS MANUAL

TK-2200 (K): 2-channel VHF FM Transceiver

TK-3200 (K): 2-channel UHF FM Transceiver

TK-2200 (K2): 8-channel VHF FM Transceiver

TK-3200 (K2): 8-channel UHF FM Transceiver

FEATURES

•2 channels (K) or 8 channels (K2) with 27 VHF operating frequencies (TK-2200) or 56 UHF operating frequencies (TK-3200) and 122 tone/ code settings for each channel allowing you to ignore unwanted calls.

•Built in voice scrambler gives you complete privacy for your conversations.

•Hands free operation when using an optional headset.

•Voice announcement lets you know which channel you have selected and which settings you have made when reassigning key functions and channel settings.

Image 2

Contents

TK-2200 Thank YOU Operating Conditions FCC License Information Iii Explosive Atmospheres GASES, DUST, FUMES, etcOne or more of the following statements may be applicable Page Contents Quantity Warranty card B62-1791-XXUnpacking and Checking Equipment Rapid battery charger AC adaptor Ni-MH battery pack Jack coverOrientation Antenna optionalPreparation Pack from the charger INSTALLING/ Removing the Battery Pack Installing the Optional Antenna Installing the Cover Over the SPEAKER/ Microphone Jacks Getting Started Rotate the Channel selector to select your desired channelPress and hold the Lock key while Turning the transceiver power onVoice Operated Transmission VOX To decrease the level Press the Lock key to increaseVOX Gain level and the Scan key To stop transmitting, stop speaking To exit VOX mode, set the VOX Gain level page 10 to OFFKEY Functions To start scanning, press the Scan key To end Scan, press the Scan key againBackground Operations Quiet Talk QT/ Digital Quiet Talk DQT Channel Setup Mode TK-2200 K2 TK-3200 K2 Channel ModelDesired channel Release the PTT switch and Lock keyRotate the Channel selector to your Press the Lock key to incrementTK-2200 Operating OFFTK-3200 Operating Press the Lock key or Scan key to select QT or DQT setup Tone number or the Scan key to New tone or code103.5 Hz 167.9 Hz 107.2 Hz 173.8 Hz QT Channel SettingsOff DQT Channel Settings DQTKEY Assignment Mode Function NameOr the Scan key, while releasing Continue to press and hold the key toBe reprogrammed either the Lock key Remaining keyTurn the transceiver power OFF To save the setting, otherwiseOperation will cancel Calling Alert MONITOR/ Squelch OFF Temporary Delete Scan key while turning ALL Reset ModeTransceiver power on Release the keysOptional Accessories Battery pack may be dead Troubleshooting GuideProblem Solution