Kenwood TK-3200 Continue to press and hold the key to, Be reprogrammed either the Lock key

To change the functions of the Call and Monitor keys:

		With the transceiver power OFF, press
		and hold the Lock and Scan keys
1		while turning the transceiver power ON.
		Continue to hold the Lock and Scan
	1
		keys until the LED lights orange and the
		transceiver announces “Setup”.
		Continue to press and hold the key to
		be reprogrammed (either the Lock key
		or the Scan key), while releasing the
2		remaining key.
		The transceiver will announce “Table
		zero” {page 25}.
		If you continue to hold both keys, or if
		you release both keys, the operation will
		cancel in 5 seconds.

3Release the key.

4

Press the Lock key to increment the Table number or the Scan key to decrement the number, to select the new key function

Table numbers and their corresponding functions are provided in the table above. A voice announcement will inform you of the currently selected Table number.

26