Dukane 8914 user manual About the filter cover for bottom-up use

Setting up

About the filter cover for bottom-up use

WARNING ►Do not replace the fi lter cover during use or immediately after use. While the projector is connected with a power supply, or the projector is in a high temperature state, handling could cause an electric shock, a fire, a burn and/or malfunction to the projector. Before handling the projector, make sure the power switch is off and the power cord is not plugged in, then wait at least 45 minutes.

When the projector is installed bottom up, please use the accessory filter cover for bottom-up use. It is higher than usual fi lter cover, to keep the space for intake ventilation. Please change the fi lter cover in the following procedure.

Filter cover’s claws	Filter cover’s claws
To remove	To set
Filter cover	Filter cover for bottom-up use

1. After making sure that the projector is cool adequately, slowly turn the projector so that the lens-side is facing up. Please be careful for the projector

not to fall. While the projector is placed lens-side up, hold the projector.

2. Unhooking the fi lter cover’s claws, pull the fi lter cover in the direction of the arrow to remove it.

3.

4.

Replace the fi lter cover for bottom-up use and snap it back into place.

Slowly turn the projector so that the top is facing up.

9