Multifunctional settings
OPTION Menu (continued)
Item
SERVICE
Description
Selecting this item displays the SERVICE menu
Select an item using the buttons ▲/▼, and press the button ► or the ENTER button on the remote control to execute the item
FAN SPEED AUTO ADJUST GHOST KEY LOCK FILTER MESSAG FACTORY RESET
FAN SPEED
Using the buttons ▲/▼ switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.
HIGH NORMAL
AUTO ADJUST
Using the buttons ▲/▼ enables/disables the automatic adjustment When DISABLE is selected, the automatic adjustment feature is disabled, although rough adjustment is automatically performed depending on the basic setting.
ENABLE DISABLE
Depending on conditions, such as input image, signal cable to the projector, environment around the projector, etc., the automatic adjustment may not work correctly. In such a case, please choose DISABLE to disable the automatic adjustment, and make adjustment manually.
GHOST
1.Select a color element of ghost using the buttons ◄/►
2.Adjust the selected element using the buttons ▲/▼ to disappear ghost.
KEY LOCK
Using the buttons ▲/▼ turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked.
TURN ON TURN OFF
Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
FILTER MESSAGE
Use the ▲/▼ button to set the timer for the interval to show the message for cleaning up the air fi lter.
100h 200h 300h TURN OFF 50h
After selecting “50h”, 100h”, “200h”, or “300” , the message “CLEAN THE AIR FILTER” will appear after the timer reaches the interval time set by the menu. Please refer to the “FILTER TIME” item ( 36) and the table “Related message” ( 42)
When the “TURN OFF” is chosen, the
no message. If the air fi lter becomes blocked by dust or others, the internal temperature will rise, which could cause malfunction, or reduce the lifetime of the projector.
It is recommended to choose “100h” in general. Please be careful with the operating environment of the projector and the condition of air
filter, especially when the “200h”, “300h” or “TURN OFF” is chosen.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this function all the items in all of menus will collectively return to the initial setting . Note that the items LAMP TIME, FILTER TIME and LANGUAGE are not reset.
RESET CANCEL
37