Dukane 8914 user manual Connecting power supply

Page 15

Setting up

Connecting power supply

WARNING ► Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in ﬁ re and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's speciﬁ ed voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

Connector

of the power cord

AC inlet

Connect the connector of the power cord to the AC inlet of the projector.

Firmly plug the power cord's plug into the outlet.

Image 15

Contents Model Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Projector features PreparationsFastening the lens cover CB/PB Part namesProjector ComponentRemote control Control buttonsMagnify Setting up For the model 8914/8915 ArrangementAdjusting the projectors elevator About the ﬁlter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with ampliﬁer outputExamples of connection with a computer Audio R out Examples of connection with a VCR/DVD playerAudio/Video cable Video out Audio L outConnecting power supply Putting batteries Remote controlUsing the remote control STANDBY/ON Power on/offTurning on the power Turning off the powerTemporarily muting the sound Adjusting the volumeSelecting an input signal Operating For a video signal/no signal Searching an input signalAdjusting the zoom and focus  For an RGB signal For a component video signal Using the automatic adjustment featureAdjusting the position  For a video signal or s-video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenAdvanced Menu Multifunctional settingsUsing the menu function Easy MenuAspect Mode Brightness Contrast Color Tint Shrpness Whisper Easy MenuDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description #3 Custom  #3 Default  #2 Custom Picture MenuGamma Color Tint Sharpness Picture MenuColor Temp High  Middle  LOW  CustomProgressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Image Menu Aspect Over Scan Position PhaseFor an RGB signal For a video signal / no signal 43  169  SmallSize Auto Adjust Execute For a video signal or s-video signalImage Menu Auto  Ntsc  PAL  Secam Input MenuColor Space Component Video Format Compo Nent  Scart RGBInformation Input MenuSetup Menu Whisper Mirror VolumeAudio Screen Menu Menu Position OSD Bright BlankBright  Dark Turn on  Turn OFF Screen MenuStart UP MyScreen MyScreen Lock DescriptionNo Input is Detected Sync is OUT of Range MessageReset  Cancel Option MenuAuto Search Auto OFF Lamp Time Filter Time Option Menu Lamp MaintenanceLamp Case of replacement by yourselfAir ﬁlter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Related messages Internal temperature is risingHeated Regarding the indicator lampsLamp does not light, and there is a Possibility that interior portion has becomeThere is a possibility that the interior portion Regarding the indicator lampsIt is time to clean the ai r ﬁlter Cooling fan is not operatingVolume is adjusted to an extremely low level Electrical power cord is not pluggedPower switch is not set to the on position Signal cables are not correctly connectedLens cap is attached Brightness is adjusted to an extremely low levelColor settings are not correctly adjusted Color Space setting is not suitableAudio input SpeciﬁcationRGB input RGB outputSpeciﬁcations Page Example of computer signal Vesa TextVesa Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsComponent Video D Y, E CB/PB F CR/PR Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jack RTSCTS Connecting the cable Communications settingRS-232C Communication Increasing the projector setting value Increment command Requesting projector status Get commandChanging the projector settings Set command Using the projector default settings Reset CommandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Page Audio Visual Products