Operating
Multifunctional
settings
Using the menu function
This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION, and EASY MENU. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.
ENTER button
Cursor buttons
MENU button
RESET button
|
| VIDEO | RGB SEARCH |
|
| ASPECT | AUTO BLANK |
POSITION | MENU | MAGNIFY | VOLUME |
ON |
| ||
|
| OFF | MUTE |
|
| FREEZE | KEYSTONE |
| ENTER |
|
|
|
| POSITION | MENU |
ESC | RESET |
|
|
|
|
| ENTER |
|
| ESC | RESET |
1. | Press the MENU button on the remote control or one of | MENU [RGB] | :SELECT | |
the cursor buttons on the projector. | PICTURE | BRIGHTNESS ＋0 |
| |
The Advanced MENU or EASY MENU will appear. | IMAGE | CONTRAST ＋0 |
| |
INPUT | GAMMA DEFAULT 1 | |||
SETUP | COLOR TEMP 6500K |
| ||
In the EASY MENU | SCREEN | COLOR +0 |
| |
OPTION | TINT +0 |
| ||
EASY MENU | SHARPNESS +0 |
| ||
2. | If you want to change it to the Advanced MENU, select the |
| PROGRESSIVE TURN OFF | |
| MY MEMORY SAVE 1 |
| ||
|
|
| ||
3. | "Go to Advanced Menu". | EASY MENU |
| |
Use the cursor buttons ▲/▼ to select an item to operate. | ASPECT 4:3 |
| ||
MODE NORMAL |
| |||
| BRIGHTNESS | +0 | ||
4. | Use the cursor buttons◄/► to operate the item. | CONTRAST | +0 | |
COLOR |
| +0 | ||
| TINT |
| +0 | |
In the Advanced MENU | SHARPNESS | +3 | ||
WHISPER NORMAL |
| |||
2. | Use the cursor buttons ▲/▼ to select a menu. | MIRROR NORMAL |
| |
RESET |
| |||
If you want to change it to the EASY MENU, select the | FILTER TIME 0 |
| ||
| LANGUAGE ENGLISH | |||
EASY MENU. | Go To Advance Menu... | |||
|
|
| ||
Then press the cursor button ► on the projector or remote |
|
|
| |
control, or the ENTER button on the remote control to select an item. The |
| |||
display of the selected menu will be active. |
|
|
| |
3. Use the cursor buttons ▲/▼ to select an item to operate.
Then press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. The operation menu of the selected item will appear.
4. Use the cursor buttons▲/▼ to operate the item.
●When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE etc.) cannot be reset.
●In the advanced menu, when you want to return to the previous display, press the cursor button ◄ on the projector or remote control, or the ESC button on the remote control.
5. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will
automatically disappear after about 10 seconds.
●Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed.
22