Dukane 8914 Searching an input signal, Selecting an aspect ratio, Adjusting the zoom and focus

Page 20

Operating

Searching an input signal

1. Press the SEARCH button on the remote control.

The projector will start to check its input ports in order to fi nd any input signals.

Then when an input is found, the projector will stop searching and display the image. If no signal is found, the projector will return to the state selected before the operation.

VIDEO RGB SEARCH

ASPECT

AUTO BLANK

RGB IN 1 RGB IN 2 COMPONENT VIDEO S-VIDEO VIDEO

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.

Each time you press the button, the projector switches the mode for aspect ratio in turn.

For an RGB signal

NORMAL 4:3 16:9

VIDEO

RGB SEARCH

 

ASPECT

AUTO BLANK

For a video signal/no signal

MAGNIFY

VOLUME

4:3 16:9 SMALL

ON

 

 

 

The NORMAL mode keeps the original aspect ratio of the signal.

For an HDTV signal of 1125i (1080i) or 750p (720p) as the COMPONENT VIDEO input, only 16:9 mode can be selected.

Performing the automatic adjustment initializes the aspect ratio setting.

Adjusting the zoom and focus

1.

2.

Use the zoom knob to adjust the screen size.

Focus ring

Zoom knob

Use the focus ring to focus the picture.

18

Image 20
Contents Model Page Trademark acknowledgment About this manualThank you for purchasing this projector Content Fastening the lens cover Projector featuresPreparations Part names ProjectorComponent CB/PBMagnify Remote controlControl buttons Setting up Arrangement For the model 8914/8915Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output Examples of connection with a VCR/DVD player Audio/Video cableVideo out Audio L out Audio R outConnecting power supply Remote control Putting batteriesUsing the remote control Power on/off Turning on the powerTurning off the power STANDBY/ONAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focus For an RGB signal  For a video signal/no signalUsing the automatic adjustment feature Adjusting the position For a video signal or s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenMultifunctional settings Using the menu functionEasy Menu Advanced MenuDescription Aspect Mode Brightness Contrast Color Tint Shrpness WhisperEasy Menu Go To Advanced Menu Description Mirror Reset Filter Time LanguageEasy Menu Gamma #3 Custom  #3 Default  #2 CustomPicture Menu Picture Menu Color TempHigh  Middle  LOW  Custom Color Tint SharpnessLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Progressive MY MemoryTV  Film  Turn OFF Aspect Over Scan Position Phase For an RGB signalFor a video signal / no signal 43  169  Small Image MenuImage Menu Size Auto Adjust ExecuteFor a video signal or s-video signal Input Menu Color Space Component Video FormatCompo Nent  Scart RGB Auto  Ntsc  PAL  SecamInput Menu InformationAudio Setup MenuWhisper Mirror Volume Bright  Dark Screen MenuMenu Position OSD Bright Blank Screen Menu Start UPMyScreen MyScreen Lock Description Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeAuto Search Auto OFF Lamp Time Filter Time Reset  CancelOption Menu Option Menu Maintenance LampCase of replacement by yourself LampAir filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensRelated messages Time the lamp timer has counted is approaching 2000 hoursThere is no input signal Internal temperature is rising Related messagesRegarding the indicator lamps Lamp does not light, and there is aPossibility that interior portion has become HeatedRegarding the indicator lamps It is time to clean the ai r filterCooling fan is not operating There is a possibility that the interior portionElectrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Volume is adjusted to an extremely low levelBrightness is adjusted to an extremely low level Color settings are not correctly adjustedColor Space setting is not suitable Lens cap is attachedSpecification RGB inputRGB output Audio inputSpecifications Page Vesa Example of computer signalVesa Text Initial set signals Connection to the ports RGB in 1, B RGB in 2, C RGB OUTComponent Video D Y, E CB/PB F CR/PR CTS Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS RS-232C Communication Connecting the cableCommunications setting Requesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Page Audio Visual Products