Dukane 8914 user manual Using the automatic adjustment feature, Adjusting the position

Page 21

Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.

VIDEO RGB SEARCH

For an RGB signal

ASPECT

AUTO BLANK

The vertical position, the horizontal position, the clock phase

and the horizontal size will be automatically adjusted. MAGNIFY ON VOLUME And the aspect ratio will be automatically selected. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

For a video signal or s-video signal

The video format best suited for the respective input signal and the aspect ratio will be selected automatically.

This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu ( 30) . For a component video signal, the signal type is identifi ed automatically independently of this function.

For a video signal, s-video signal or component video signal

The vertical position and horizontal position will be automatically adjusted.

For a component video signal

The aspect ratio will be automatically selected.

The clock phase will be automatically adjusted.

The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.

Adjusting the position

1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen.

FREEZEKEYSTONE

2. Use the cursor buttons ▲/▼/◄/► to adjust the picture position.

POSITIONMENU

ENTER

When you want to reset the operation, press the RESET button on the remote control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

When this function is performed at a video signal, a certain extra such as a line may appear outside a picture.

19

Image 21
Contents Model Page About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Projector features PreparationsFastening the lens cover Projector Part namesComponent CB/PBRemote control Control buttonsMagnify Setting up For the model 8914/8915 ArrangementAdjusting the projectors elevator About the filter cover for bottom-up use About Plug-and-Play capability Connecting your devicesConnecting to a monitor output Connecting to a speaker with amplifier outputExamples of connection with a computer Audio/Video cable Examples of connection with a VCR/DVD playerVideo out Audio L out Audio R outConnecting power supply Putting batteries Remote controlUsing the remote control Turning on the power Power on/offTurning off the power STANDBY/ONSelecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom and focus Searching an input signal For an RGB signal  For a video signal/no signalAdjusting the position Using the automatic adjustment feature For a video signal or s-video signal  For a component video signalCorrecting the keystone distortions Using the magnify featureTemporarily blanking the screen Freezing the screenUsing the menu function Multifunctional settingsEasy Menu Advanced MenuAspect Mode Brightness Contrast Color Tint Shrpness Whisper Easy MenuDescription Mirror Reset Filter Time Language Easy MenuGo To Advanced Menu Description #3 Custom  #3 Default  #2 Custom Picture MenuGamma Color Temp Picture MenuHigh  Middle  LOW  Custom Color Tint SharpnessProgressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 For an RGB signal Aspect Over Scan Position PhaseFor a video signal / no signal 43  169  Small Image MenuSize Auto Adjust Execute For a video signal or s-video signalImage Menu Color Space Component Video Format Input MenuCompo Nent  Scart RGB Auto  Ntsc  PAL  SecamInformation Input MenuSetup Menu Whisper Mirror VolumeAudio Screen Menu Menu Position OSD Bright BlankBright  Dark Start UP Screen MenuMyScreen MyScreen Lock Description Turn on  Turn OFFNo Input is Detected Sync is OUT of Range MessageReset  Cancel Option MenuAuto Search Auto OFF Lamp Time Filter Time Option Menu Lamp MaintenanceLamp Case of replacement by yourselfAir filter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Related messages Internal temperature is risingLamp does not light, and there is a Regarding the indicator lampsPossibility that interior portion has become HeatedIt is time to clean the ai r filter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPower switch is not set to the on position Electrical power cord is not pluggedSignal cables are not correctly connected Volume is adjusted to an extremely low levelColor settings are not correctly adjusted Brightness is adjusted to an extremely low levelColor Space setting is not suitable Lens cap is attachedRGB input SpecificationRGB output Audio inputSpecifications Page Example of computer signal Vesa TextVesa Initial set signals RGB in 1, B RGB in 2, C RGB OUT Connection to the portsComponent Video D Y, E CB/PB F CR/PR Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jack RTSCTS Connecting the cable Communications settingRS-232C Communication Changing the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Page Audio Visual Products