Dukane 8914 user manual Input Menu, Color Space Component Video Format, Compo Nent  Scart RGB

Page 32

Multifunctional settings

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

 MENU [RGB]

   :SELECT

 PICTURE

 COLOR SPACE  AUTO

 IMAGE

 COMPONENT    COMPONENT

 INPUT

 VIDEO FORMAT AUTO

 SETUP

 INFORMATION

 SCREEN

 

 OPTION

 

 EASY MENU

 

Item

COLOR SPACE

COMPONENT

VIDEO FORMAT

Description

Using the buttons ▲/▼ switches the mode for color space AUTO RGB SMPTE240 REC709 REC601

This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i) from the component video port)

The AUTO mode automatically selects the optimum mode.

The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port

COMPO NENT SCART RGB

When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer.

Using the buttons ▲/▼ switches the mode for video format

AUTO NTSC PAL SECAM

N-PAL M-PAL NTSC4.43

This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type is identifi ed automatically independently of this function.

The AUTO mode automatically selects the optimum mode

The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal.

30

Image 32
Contents Model Page Trademark acknowledgment About this manualThank you for purchasing this projector Content Fastening the lens cover Projector featuresPreparations Part names ProjectorComponent CB/PBMagnify Remote controlControl buttons Setting up Arrangement For the model 8914/8915Adjusting the projectors elevator About the filter cover for bottom-up use Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Connecting to a monitor outputConnecting to a speaker with amplifier output Examples of connection with a VCR/DVD player Audio/Video cableVideo out Audio L out Audio R outConnecting power supply Remote control Putting batteriesUsing the remote control Power on/off Turning on the powerTurning off the power STANDBY/ONAdjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Adjusting the zoom and focus For an RGB signal  For a video signal/no signalUsing the automatic adjustment feature Adjusting the position For a video signal or s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenMultifunctional settings Using the menu functionEasy Menu Advanced MenuDescription Aspect Mode Brightness Contrast Color Tint Shrpness WhisperEasy Menu Go To Advanced Menu Description Mirror Reset Filter Time LanguageEasy Menu Gamma #3 Custom  #3 Default  #2 CustomPicture Menu Picture Menu Color TempHigh  Middle  LOW  Custom Color Tint SharpnessLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Progressive MY MemoryTV  Film  Turn OFF Aspect Over Scan Position Phase For an RGB signalFor a video signal / no signal 43  169  Small Image MenuImage Menu Size Auto Adjust ExecuteFor a video signal or s-video signal Input Menu Color Space Component Video FormatCompo Nent  Scart RGB Auto  Ntsc  PAL  SecamInput Menu InformationAudio Setup MenuWhisper Mirror Volume Bright  Dark Screen MenuMenu Position OSD Bright Blank Screen Menu Start UPMyScreen MyScreen Lock Description Turn on  Turn OFFMessage No Input is Detected Sync is OUT of RangeAuto Search Auto OFF Lamp Time Filter Time Reset  CancelOption Menu Option Menu Maintenance LampCase of replacement by yourself LampAir filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensRelated messages Time the lamp timer has counted is approaching 2000 hoursThere is no input signal Internal temperature is rising Related messagesRegarding the indicator lamps Lamp does not light, and there is aPossibility that interior portion has become HeatedRegarding the indicator lamps It is time to clean the ai r filterCooling fan is not operating There is a possibility that the interior portionElectrical power cord is not plugged Power switch is not set to the on positionSignal cables are not correctly connected Volume is adjusted to an extremely low levelBrightness is adjusted to an extremely low level Color settings are not correctly adjustedColor Space setting is not suitable Lens cap is attachedSpecification RGB inputRGB output Audio inputSpecifications Page Vesa Example of computer signalVesa Text Initial set signals Connection to the ports RGB in 1, B RGB in 2, C RGB OUTComponent Video D Y, E CB/PB F CR/PR CTS Audio 1-IN Ø3.5 stereo mini jack, I J Audio 2 L/R RCA jackRTS RS-232C Communication Connecting the cableCommunications setting Requesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandRS-232C Communication Be EF FB FA Color Temp Gain G Aspect Keystone Mute OSD Bright Page Audio Visual Products