Multifunctional settings
IMAGE Menu (continued)
Item
H SIZE
AUTO ADJUST
EXECUTE
Description
Using the buttons ▲/▼ adjusts the horizontal size.
Large Small
This item can be selected only for an RGB signal
When this adjustment is excessive, the picture may not be displayed correctly. In such a case, please reset the adjustment by pressing the RESET button on the remote control during this operation.
Selecting this item performs the automatic adjustment feature.
For an RGB signal
The vertical position, the horizontal position, the clock phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically selected.
Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal will be selected automatically.
This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu. For a component video signal, the signal type is identifi ed automatically independently of this function.
For a video signal,
For a component video signal
The aspect ratio will be automatically selected.
The clock phase will be automatically adjusted.
The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.
29