Dukane 28A9115 user manual Operations, Basic Operation Description

OPERATIONS (continued)

Basic Operation

The basic operations shown in Table 3 is performed from the supplied remote control transmitter or the projector control panel. Items indicated by (*) may be used from the control panel.

Table 3 . Basic Operation

Item	Description
	Select RGB Input : Press the RGB button.
	VIDEO/S-VIDEO/COMPONENT VIDEO → RGB IN 1/RGB IN 2/DVI
INPUT	RGB IN 1 → RGB IN 2 → DVI (→ RGB IN 1)
	Select Video Input : Press the VIDEO button.
SELECT (*) RGB IN 1/RGB IN 2/DVI → VIDEO/S-VIDEO/COMPONENT VIDEO
	VIDEO → S-VIDEO → COMPONENT VIDEO (→ VIDEO)
	• The selected signal name is displayed for approximately 3 seconds when the input
	signal is changed.

Set/Clear Position Adjustment Mode : Press the POSITION button.

The [ ] icon is displayed in the POSITION mode.

	Image Position Adjustment: Press the ,		, and	buttons in the
POSITION	POSITION mode.
	• Valid only in the MAGNIFY mode with a video signal is input.
	• After approximately 10 seconds of inactivity the [		] icon is extinguished and the
	POSITION mode is cleared automatically.
	• , , and	buttons may operate as the mouse control button. Refer to page 4.

Initialise Each Item : Select an item and press the RESET button.

Initialise Position Adjustment : Press the RESET button and the RESET (*) POSITION mode. This function is valid only when RGB signal is input.

•Valid except for the VOLUME, LANGUAGE, WHISPER and H PHASE.

•The RESET button may operate as the mouse control button. Refer to page 4.

Set MAGNIFY Mode : Press the MAGNIFY	button.
Move Magnified Area : Run the POSITION in the MAGNIFY mode.
Adjust Magnification : Press the MAGNIFY	/	button in MAGNIFY

MAGNIFY mode.

Clear MAGNIFY Mode : Press the MAGNIFY OFF button.

•The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT SELECT or VIDEO, or by changing the input signal.

	Set/Clear FREEZE Mode : Press the FREEZE button. The [II] icon is
	displayed, and the image frozen, in the FREEZE mode.
FREEZE	• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,
	Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, KEYSTONE, or by
	changing the input signal.
	• Do not forget to clear frozen static images.

NOTE • Use the remote control transmitter at a distance of approximately 5m from the sensor on the front of the projector, and within a range of 30° left-right. Strong light and obstacles will interfere with operation of the remote control transmitter.

ENGLISH-10