English
Setting a preferred color temperature
To set a preferred color temperature:
1.Highlight Color Temperature and select User 1, User 2, or User 3 by pressing 
/ 
on the projector or remote control.
2.Press 
to highlight Color Temperature User_ Fine Tuning and press ENTER. The Color Temperature User_ Fine Tuning page displays.
The menu name ‘User_’ corresponds with the setting selected in Color Temperature.
Color Temp User 1 Fine Tuning
Red Gain | +50 |
|
|
|
| ||
Green Gain | +50 |
|
|
Blue Gain | +50 |
|
|
Red Offset | +50 |
|
|
Green Offset | +50 |
|
|
Blue Offset | +50 |
|
|
EXIT Back
3.Press 
/
to highlight the item you want to change and adjust the values by pressing 
/ 
.
•Red Gain/Green Gain/Blue Gain: Adjusts the contrast levels of Red, Green, and Blue.
•Red Offset/Green Offset/Blue Offset: Adjusts the brightness levels of Red, Green, and Blue.
4.To save and leave the settings, press MENU once or EXIT twice.
Color Management
In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it.
Proper color management can only be achieved under controlled and reproducible viewing conditions. You will need to use a colorimeter (color light meter), and provide a set of suitable source images to measure color reproduction. These tools are not provided with the projector, however, your projector supplier should be able to provide you with suitable guidance, or even an experienced professional installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted to favorite colors. When you select each color, you can independently adjust its color range and saturation according to your preference.
To adjust and store the settings:
1.In the Picture -- Advanced menu, highlight Color Management and
| press ENTER. The Color Management page displays. | Picture |
| |||
2. | Highlight Primary Color and press | / | to select a color from among | Black Level | 0 IRE | |
Clarity Control |
| |||||
Color Temperature | Normal | |||||
| Red, Yellow, Green, Cyan, Blue, and Magenta. | |||||
| Color Temperature User_ Fine | |||||
| Gamma Selection | 2.4 | ||||
|
|
|
| |||
3. | Press to highlight Range and press | / | to select the color range you | Brilliant Color | On | |
Color Management | ENTER | |||||
| wish to make adjustment. The bigger the range, the more proportions of | Dynamic Black | On | |||
| IRIS | 0 | ||||
its two adjacent colors the color contains. | Lens Shift |
|
EXIT Back
Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red is selected. Increasing its range will include both the red color close to yellow and red color close to magenta.
4.Press 
to highlight Saturation and adjusts the color saturation level by pressing 
/ 
.
If you select Red and set its range at 0, only the saturation of the pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
Magenta
+15
+15
EXIT Back
Yellow Green
Magenta Cyan
Blue
5.To leave and save the settings, press MENU once or EXIT twice.
28 Using the projector