Using the menus
The projector is equipped with
Below is the overview of the OSD menu.
Main menu icon
Main menu
Highlight
Status
Press MENU/ EXIT to the previous page or to exit.
Current input signal
The following example describes how to set the OSD language.
1. Press MENU/EXIT on the projector or | 3. Press | to highlight |
remote control to turn the OSD menu | Language and press Enter to | |
on. | select a preferred language. | |
2.Use 
/
to highlight the SYSTEM SETUP: Basic menu.
4.Press MENU/EXIT twice* on the projector or remote control to leave and save the settings.
*The first press leads you back to the main menu and the second press closes the OSD menu.
Operation 33