4.16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration.
5.16:10: Scales an image so that it is displayed in the center of the screen with a 16:10 aspect ratio. This is most suitable for images which are already in a 16:10 aspect, like high definition TV, as it displays them with out aspect alteration.
16:9 picture
16:10 picture
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
• Press MODE/ENTER on the remote control
or projector repeatedly until your desired mode is selected.
•Go to the PICTURE > Picture Mode menu and press 
/ 
to select a desired mode.
The picture modes are listed below.
1.Dynamic mode: Maximizes the brightness of the projected image. This mode is suitable for environments where
2.Presentation mode (Default): Is designed for presentations. The brightness is emphasized in this mode.
3.sRGB mode: Maximizes the purity of RGB colors to provide
4.Cinema mode:!Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environment.
5.User 1/User 2 mode: Recalls the settings customized based on the current available picture modes. See "Setting the User 1/User 2 mode" on page 40 for details.
Picture mode is fixed in Presentation mode when PointDraw™ function is on.
Operation 39