BenQ PB8263 user manual Connecting Video source devices, Best video quality, Better video quality

Page 25

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following output sockets:

•DVI

•Component Video

•S-Video

•Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the projector and the Video source device as described below:

Best video quality

The best available video connection method is DVI, if your source device is equipped with a DVI socket. Based on the type of DVI connector you have, you can enjoy a digital or high- end analog video quality.

See "Connecting a DVI source device" on page 26 for how to connect the projector to a DVI source device and other details.

If no DVI source is available, the next best video signal is available by connecting your device to the projector with a Component Video (not to be confused with composite Video) cable. Digital TV tuner and DVD players output Component Video natively, so if available on your devices, they should be your connection method of choice in preference to S-Video or (composite) Video.

See "Connecting a Component Video source device" on page 27 for how to connect the projector to a component video device.

Better video quality

The S-Video method provides a better quality analog video than standard composite Video. If you have both composite Video and S-Video output terminals on your Video source device, you should elect to use the S-Video option.

See "Connecting an S-Video source device" on page 28 for how to connect the projector to an S-Video device.

Least video quality

Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here.

See "Connecting a composite Video source device" on page 29 for how to connect the projector to a composite Video device.

Connecting Audio

The projector has two built-in speakers which are designed to provide audio functionality accompanying data presentations for business purposes. It is not designed for, nor intended for audio reproduction use as might be expected in home theatre or home cinema applications.

If you have a separate sound system, you will most likely want to connect the audio output of your Video source device to that sound system, instead of to the projector.

The audio connections illustrated in the following sections are provided for informational purposes only. You need not connect audio to the projector if there is an alternate sound system available, or if audio is not required.

Connection 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Welcome Disclaimer CopyrightTable of contents Temperature information Safety Instructions Important safety instructionsSafety Instructions Locations with an ambient temperature Locations near fire alarmsBedding or any other soft surface Allow at least 50 cm clearance from wallsSafety Instructions Introduction Projector featuresIntroduction Shipping contents Front/upper side Projector exterior viewRear/side view Lower viewConnector panel Projector Controls and functionsRemote control Volume + LED indicator lightPIP POS ModeRemote control batteries Remote control effective rangeChoosing a location Positioning your projectorSafety instructions for ceiling mounting of the projector Obtaining a preferred projected image size Page Screen Center of lens Projection distance Maximum zoom Minimum zoom1219 1500Connecting a computer Connecting a computer or monitorConnection Connection With a VGA cable With a VGA to DVI-A cable Connecting a monitorVGA to DVI-A Connecting Audio Connecting Video source devicesBest video quality Better video qualityMute on page 45 for details Connecting a DVI source device1080i 50/ 60 Hz Connecting a Component Video source deviceConnecting an S-Video source device Connecting a composite Video source device Operation Power onStart up Adjusting the projected image Switching input signalAdjusting the projection angle Fine-tuning the image size and clarity Auto-adjusting the imageAny problems? Searching for details on the imageScales an image so that it is displayed in the center Selecting the aspect ratioCorrecting keystone Optimizing the imageFor example PC/DVI-A Signal Input Selecting a preset modeYPbPr/YCbCr/DVI-D/S-Video/Video Signal Input Adjusting brightness Other adjustmentsAdjusting contrast Selecting a color temperaturePersonalizing the projector menu display Operating in a high altitude environmentHiding the image Using the laser pointer in the presentationRemote paging operations Freezing the imagePIP Picture In Picture operation Operation on the remote controlOperation in the OSD menus Shutting down the projector OSD menu system On-Screen Display OSD menu operationPressing Left/ Right on the projector or remote control Using the menusDisplay menu Display menu Image menu Source menu VolumeMirror TrebleControl menu PIP menu Care of the projector MaintenanceFront filter Access to the rear dust filter is located on the left sideRear filter Lamp information Use and replacement of the lampReplacing the lamp Re-install the lamp cover and tighten the screws Temperature informationReset lamp hours and press Exit to leave Stand-by mode IndicatorsIllustration Projector is under normal operationPower Temp Lamp Thermal events Remote control does not work TroubleshootingProjector does not turn on No pictureRemote mouse function does not work Projector specifications SpecificationsTiming chart DimensionsHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz Supported timing for PC including DVI-I inputSupported timing for Component-YPbPrinput Signal Format Horizontal Frequency Vertical Frequency KHzSupported timing for Video and S-Video inputs Limited Warranty WarrantyFCC statement Regulation StatementsEEC statement MIC statement
Top Page Image Contents