Optimizing the image
To optimize the image, use the buttons on the projector or remote control to adjust the image settings directly, or to change the settings on the
The following instructions are optional. You do not need to follow every step. It depends on the image quality you desire.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the projection angel of the projector, you will need to manually correct it following ONE of these steps.
• Press 
Left/ 
Right on the projector or remote control to display the status bar labelled Keystone. Press 
Right to correct keystoning at the top of the image. Press 
Left to correct keystoning at the bottom of the image.
• Press MENU on the projector or remote control.
Go to 
Display > Keystone and adjust the
values by pressing 
Left/ 
Right on the projector or remote control.
For example,
1.Press 
Right on the projector or remote control or
2.Press 
Right on the projector or remote control when you are in the Display > Keystone menu.
Keystone |
|
| 0 |
| Keystone |
1.Press 
Left on the projector or remote control or
2.Press 
Left on the projector or remote control when you are in the Display > Keystone menu.
Keystone |
|
| 0 |
| Keystone |
+6
34 Operation