BenQ PB8263 user manual Control menu

Control menu

FUNCTION

(default setting / DESCRIPTION (default setting / value) value)

	Language sets the language for the OSD control menus.
Language	Use Left/ Right to select the desired language from among English,
(English)
	French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified
	Chinese, Japanese and Korean.
	OSD Pos. (Center-bottom)
	Selects a desired OSD position.
OSD
	OSD Time (10)
	Sets the length of time the OSD will remain active after your last button
	press. The range is from 5 to 60 seconds.
	Source Scan (On)
	Sets whether the projector searches automatically for input signals. If the
	source scan is on, the projector will search for input signals until it
	acquires a signal. If the function is not activated, the projector selects the
	last input signal.
	Keystone Hold (0)
	When selected, preserves the last keystone correction value even when the
	projector is restarted.
	Mirror Hold (0)
	When selected, preserves the last mirror correction value even when the
Setup	projector is restarted.
	Blank Time (0)
	Determines the length of time before the projector will automatically
	shutdown when Blank is activated.
	Auto Off (0)
	Sets the length of time before the projector will automatically shutdown
	when there is no input signal detected.
	User Logo (Default)
	Enables the user to select which logo screen will appear during projector
	start-up. Three modes are available: Default (BenQ logo), black screen or
	blue screen.
Preset Mode	Preset modes are provided so you can optimize your projector image set-
(depends on the	up to suit your program type.
selected input	See "Selecting a preset mode" on page 35 for details.
source)
	Returns all settings to the factory preset values.
Reset		The following settings will still remain: Phase, System, Language,
		Keystone hold, Mirror hold, User logo, High Altitude, PIP H Position,
		PIP V Position, PIP Brightness, PIP Contrast, PIP Color, PIP Tint, and
		PIP Sharpness.

46 Operation