BenQ PB8263 user manual Connecting a DVI source device, Mute on page 45 for details

Page 26

Connecting a DVI source device

The projector provides a DVI-I input socket that allows you to connect it to a DVI source device like DVD player, or a VGA output device like notebook or desktop computer.

There are three types of DVI connector: DVI-A, DVI-D, and DVI-I. The DVI-I socket is an

integrated connector which supports both formats: DVI-A, and DVI-D.

DVI-A format is used to carry a DVI signal to an analog (VGA) display, or vice-versa. Although some signal quality is lost from the signal conversion, it still transmits higher picture quality than standard VGA connection.

DVI-D format is used to directly carry a digital signal to a digital display without signal conversion. The pure digital connection provides faster and higher image quality than analog connection, due to the nature of the digital format.

DVI-A and DVI-D formats are non-interchangeable. You cannot connect a DVI-A format connector to a DVI-D equipment. Make sure what kind of format you need before you purchase the cable. Or you can purchase a DVI-I cable which will be more useful in any type of DVI connection situations.

Examine your source device to determine if it has an unused DVI or VGA (D-Sub) output socket available:

If so, you can continue with this procedure.

If not, you will need to reassess which method you can use to connect to the device.

To connect the projector to a DVI source device through a DVI cable:

For information on connecting a DVI source device to a computer through a VGA to DVI-A cable, see "Connecting a computer" on page 22.

1.Take the DVI (DVI-D or DVI-I) cable and connect one end to the DVI output socket of the DVI source device.

2.Connect the other end of the cable to the DVI-I signal input socket on the projector.

3.If you wish to make use the projector speakers, take a suitable audio cable and connect one end of the cable to the audio output sockets of the video device, and the other end to the PC Audio socket or Audio L/R sockets on the projector.

Once connected, the audio can be controlled by the remote control (Volume +/-) or projector On-Screen Display (OSD) menus. See "Volume", "Treble", "Bass", and

"Mute" on page 45 for details.

The final connection path should be like that shown in the following diagram:

AV device

DVI-D or DVI-I cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio cable

26 Connection

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Welcome Copyright DisclaimerTable of contents Temperature information Important safety instructions Safety InstructionsSafety Instructions Bedding or any other soft surface Locations near fire alarmsLocations with an ambient temperature Allow at least 50 cm clearance from wallsSafety Instructions Introduction Projector featuresIntroduction Shipping contents Rear/side view Projector exterior viewFront/upper side Lower viewConnector panel Controls and functions ProjectorRemote control PIP POS LED indicator lightVolume + ModeRemote control effective range Remote control batteriesPositioning your projector Choosing a locationSafety instructions for ceiling mounting of the projector Obtaining a preferred projected image size Page 1219 Maximum zoom Minimum zoomScreen Center of lens Projection distance 1500Connection Connecting a computer or monitorConnecting a computer Connection VGA to DVI-A Connecting a monitorWith a VGA cable With a VGA to DVI-A cable Best video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a DVI source device Mute on page 45 for detailsConnecting a Component Video source device 1080i 50/ 60 HzConnecting an S-Video source device Connecting a composite Video source device Start up Power onOperation Adjusting the projection angle Switching input signalAdjusting the projected image Any problems? Auto-adjusting the imageFine-tuning the image size and clarity Searching for details on the imageSelecting the aspect ratio Scales an image so that it is displayed in the centerFor example Optimizing the imageCorrecting keystone YPbPr/YCbCr/DVI-D/S-Video/Video Signal Input Selecting a preset modePC/DVI-A Signal Input Adjusting contrast Other adjustmentsAdjusting brightness Selecting a color temperatureOperating in a high altitude environment Personalizing the projector menu displayRemote paging operations Using the laser pointer in the presentationHiding the image Freezing the imageOperation in the OSD menus Operation on the remote controlPIP Picture In Picture operation Shutting down the projector On-Screen Display OSD menu operation OSD menu systemDisplay menu Using the menusPressing Left/ Right on the projector or remote control Display menu Image menu Mirror VolumeSource menu TrebleControl menu PIP menu Maintenance Care of the projectorRear filter Access to the rear dust filter is located on the left sideFront filter Use and replacement of the lamp Lamp informationReplacing the lamp Reset lamp hours and press Exit to leave Temperature informationRe-install the lamp cover and tighten the screws Illustration IndicatorsStand-by mode Projector is under normal operationPower Temp Lamp Thermal events Projector does not turn on TroubleshootingRemote control does not work No pictureRemote mouse function does not work Specifications Projector specificationsHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz DimensionsTiming chart Supported timing for PC including DVI-I inputSupported timing for Video and S-Video inputs Signal Format Horizontal Frequency Vertical Frequency KHzSupported timing for Component-YPbPrinput Warranty Limited WarrantyEEC statement Regulation StatementsFCC statement MIC statement
Top Page Image Contents