Safety Instructions (Continued)
12.Do not place this projector in any of the 13. Do not block the ventilation holes.
following environments. | - Do not place the projector on a blanket, |
- Space that is poorly ventilated or confined. | bedding or any other soft surface. |
Allow at least 50 cm clearance from walls | - Do not cover the projector with a cloth or |
and free flow of air around the projector. | any other item. |
- Locations where temperatures may | - Do not place inflammables near the |
become excessively high, such as the | projector. |
inside of a car with all windows rolled up. |
|
- Locations where excessive humidity, dust, |
|
or cigarette smoke may contaminate |
|
optical components, shortening the |
|
projector's life span and darkening the |
|
image. |
|
If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.
14. Always place the projector on a level, horizontal surface during operation.
| - Do not use if tilted at an angle of more |
| than 10 degrees left to right, nor at angle |
- Locations near fire alarms | of more than 15 degrees front to back. |
- Locations with an ambient temperature | Using the projector when it is not fully |
above 40°C/104°F | horizontal may cause a malfunction of, or |
- Locations where the altitudes are higher | damage to, the lamp. |
| |
than 10000 feet. |
|
10000 feet
Important safety instructions | 7 |