BenQ PB8263 user manual Using the menus, Pressing Left/ Right on the projector or remote control

Page 42

Using the menus

The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings.

Please note that the on-screen display (OSD) menus vary according to the signal type selected.

There are 10 different menu languages of your choice. See "Control menu" on page 46 for details.

The following example describes the adjustment of the keystone.

1.Press Menu on the projector or MENU on the remote control to turn the OSD menu on.

4.Adjust keystone values by

pressing Left/ Right on the projector or remote control.

2.Use Left/ Right on the projector or remote control to select the

Display menu.

3.Press Menu on the projector or

Down on the remote control to select Keystone.

5.Press Exit on the projector or MENU on the remote control twice* to leave and save the setting.

*The first press leads you back to the main menu and the second press closes the OSD menu.

42 Operation

Image 42

Contents Welcome Copyright DisclaimerTable of contents Temperature information Important safety instructions Safety InstructionsSafety Instructions Bedding or any other soft surface Locations near fire alarmsLocations with an ambient temperature Allow at least 50 cm clearance from wallsSafety Instructions Projector features IntroductionIntroduction Shipping contents Rear/side view Projector exterior viewFront/upper side Lower viewConnector panel Controls and functions ProjectorRemote control PIP POS LED indicator lightVolume + ModeRemote control effective range Remote control batteriesPositioning your projector Choosing a locationSafety instructions for ceiling mounting of the projector Obtaining a preferred projected image size Page 1219 Maximum zoom Minimum zoomScreen Center of lens Projection distance 1500Connecting a computer or monitor Connecting a computerConnection Connection Connecting a monitor With a VGA cable With a VGA to DVI-A cableVGA to DVI-A Best video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a DVI source device Mute on page 45 for detailsConnecting a Component Video source device 1080i 50/ 60 HzConnecting an S-Video source device Connecting a composite Video source device Power on OperationStart up Switching input signal Adjusting the projected imageAdjusting the projection angle Any problems? Auto-adjusting the imageFine-tuning the image size and clarity Searching for details on the imageSelecting the aspect ratio Scales an image so that it is displayed in the centerOptimizing the image Correcting keystoneFor example Selecting a preset mode PC/DVI-A Signal InputYPbPr/YCbCr/DVI-D/S-Video/Video Signal Input Adjusting contrast Other adjustmentsAdjusting brightness Selecting a color temperatureOperating in a high altitude environment Personalizing the projector menu displayRemote paging operations Using the laser pointer in the presentationHiding the image Freezing the imageOperation on the remote control PIP Picture In Picture operationOperation in the OSD menus Shutting down the projector On-Screen Display OSD menu operation OSD menu systemUsing the menus Pressing Left/ Right on the projector or remote controlDisplay menu Display menu Image menu Mirror VolumeSource menu TrebleControl menu PIP menu Maintenance Care of the projectorAccess to the rear dust filter is located on the left side Front filterRear filter Use and replacement of the lamp Lamp informationReplacing the lamp Temperature information Re-install the lamp cover and tighten the screwsReset lamp hours and press Exit to leave Illustration IndicatorsStand-by mode Projector is under normal operationPower Temp Lamp Thermal events Projector does not turn on TroubleshootingRemote control does not work No pictureRemote mouse function does not work Specifications Projector specificationsHorizontal Vertical Pixel Resolution Frequency Mode KHz MHz DimensionsTiming chart Supported timing for PC including DVI-I inputSignal Format Horizontal Frequency Vertical Frequency KHz Supported timing for Component-YPbPrinputSupported timing for Video and S-Video inputs Warranty Limited WarrantyEEC statement Regulation StatementsFCC statement MIC statement