Onkyo SR805 Audio Connection Formats, Hdmi Monitor Setting Set to No, MD recorder, etc

Page 29

Connecting Your Components—Continued

■HDMI Monitor Setting Set to No

With the HDMI Monitor setting set to No (see page 46), video input signals ﬂow through the AV receiver as shown, with composite video and S-Video sources being upconverted for the component video output. Use this setting if you connect the AV receiver’s COMPONENT VIDEO OUT to your TV.

Composite video is upconverted to S-Video and S-Video is downconverted to composite video. Note that these conversions only apply to the MONITOR OUT V and S outputs, not the VCR/DVR OUT V and S outputs.

The composite video, S-Video, and component video pass through their respective input sig- nals as they are.

On the TX-SR875, this signal ﬂow also applies when the Monitor Out Resolution setting is set to Through (see page 46).

Video Signal Flow and the Resolution Setting

On the TX-SR875, when the HDMI Monitor setting is set to No (see page 46), if the Monitor Out Resolution setting is set to anything other than Through (see page 46), the video signal ﬂow will be as shown here, with composite video and S-Video sources being upconverted for the component video output.

The composite video, S-Video, and component video outputs pass through their respective analog input signals as they are. HDMI input signals are not output.

Video Signal Flow Chart

DVD player, etc.

Composite S-Video Component HDMI

IN

AV receiver

MONITOR OUT

Composite S-Video Component HDMI

TV, projector, etc.

Video Signal Flow Chart

DVD player, etc.

Composite S-Video Component HDMI

IN

AV receiver

MONITOR OUT

Composite S-Video Component

TV, projector, etc.

Audio Connection Formats

Audio equipment can be connected to the AV receiver by using any of the following audio connection formats: analog, optical, coaxial, analog multichannel, or HDMI.

When choosing a connection format, bear in mind that the AV receiver does not convert dig- ital input signals for analog line outputs and vice versa. For example, audio signals con- nected to an optical or coaxial digital input are not output by the analog TAPE OUT.

Audio Signal Flow Chart

DVD player, etc.

HDMI Optical Coaxial Analog Multichannel

AV receiver

HDMI Optical

Analog

MD recorder, etc.

*1 Depends on the HDMI Audio setting (see page 99).

*2 Only the front L/R channels are output.

29

Image 29

Contents TX-SR875 TX-SR805 Avis Important Safety InstructionsPower PrecautionsFor models having a power cord with a polarized plug FCC Information for UserFor British models PrecautionsContents Features Make sure you have the following accessories Supplied AccessoriesPower cord THX Ultra2Zone 2 Room Zone 3 Room Multiroom CapabilityMain Room Front Panel Getting to Know the AV ReceiverGetting to Know the AV Receiver Display Rear Panel Digital Optical in 1, 2, and OUT Digital Coaxial in 1, 2,GND screw Front L/R, CENTER, Surr L/R, and Surr Back L/R SpeakersUsing the Remote Controller Remote ControllerInstalling the Batteries RECEIVER/TAPE Mode Remote ControllerAbout the Remote Controller Modes Remote Mode buttons Listening Mode buttonsTape mode Standby buttonDVD Mode CD/MD/CDR Modes Dock Mode Enjoying Home Theater Connecting Your SpeakersSubwoofer Surround back left and right speakersConnecting Your Speakers Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsFully insert the bare wire Strip about 5/8Bi-amping Speaker Hookup Bi-amping the Front SpeakersBridged Speaker Hookup Bridging the Front Speakers TX-SR875 onlyConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennasConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Audio and Video Signals to the AV Receiver Connecting Your ComponentsHdmi Monitor Setting Set to Yes Which Connections Should I Use?TV, projector, etc Video Signal Flow Chart DVD player, etc Hdmi Monitor Setting Set to NoAudio Signal Flow Chart DVD player, etc Audio Connection FormatsVideo Connection Connecting a TV or ProjectorAudio Connection HintOr the other Connecting a DVD playerDVD player Hooking Up the Multichannel InputVCR or DVR Connecting a VCR or DVR for PlaybackDigital Optical OUT Connecting a VCR or DVR for RecordingSatellite, cable, set-top box, etc About Hdmi Connecting Components with HdmiSupported Audio Formats About Copyright ProtectionMaking Hdmi Connections Video SignalsAudio Signals Game Console Connecting a Game ConsoleCamcorder, etc Connecting a Camcorder or Other AV ComponentConnecting a Turntable Connecting a CD PlayerStep CD playerPower ampliﬁer Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting a Power Ampliﬁer European model Connecting an RI DockConnecting the Power Cord Connecting Onkyo ComponentsMalfunction Some components may not support all Functions WorkDo the automatic speaker setup-this is essential Set the Power switch to the on positionTurning On the AV Receiver Turning On and StandbySpeaker Settings First Time SetupHdmi Monitor Setup First Time SetupButtons to select 1. Input/Output Assign, and then press EnterButtons to select Resolution Using the Hdmi OUT ButtonCurrent setting is displayed Press the Hdmi OUT buttonHdmi Input menu appears Hdmi Input SetupVersion OUTFirst Time Setup Assign, and then press Component Video Input SetupInput/Output Assign menu AppearsChanging the Input Display These are the default assignments Digital Input SetupDigital Input menu appears Input selector Audio inputUsing the Digital Input Button Tor Analog Input SetupButtons to select an input selec Using Audyssey MultEQ XT Automatic Speaker Setup Audyssey MultEQ XTMeasurement Positions 1st measurement positionConnect it to the Setup MIC Place the setup microphone atWhen prompted, place the setup Turn on the AV receiverWhen the calculations are com Error MessagesDisconnect the setup micro Phone Plete, the following screenWriting Error Speaker Detect ErrorOne of the front speakers has not been detected One of the surround speakers has not been detectedUsing a Powered Subwoofer Changing the Speaker Settings ManuallyReviewing the Results You want to review, and thenButtons to select 6. Miscella TV Format Setup Not North American modelsNeous, and then press Enter Buttons to select TV FormatHardware Setup menu appears AM Frequency Step Setup on some modelsButtons to select 7. Hardware Buttons to select AM FreqSelect a listening mode and enjoy SettingsSee Using the Listening Modes on Playing Your AV ComponentsListening to AM/FM Stations Tuning into AM/FM Radio StationsListening to the Radio Listening to the Radio Tuning into Stations by FrequencyDisplaying AM/FM Radio Information Followed by the D.TUN buttonWhat is RDS? Using RDS not North American modelRDS Program Types PTY This allows you to search RDS radio stations by type seeListening to Trafﬁc News TP Displaying Radio Text RTFinding Stations by Type PTY Deleting Presets Presetting AM/FM StationsSelecting Presets Setting the Display Brightness Adjusting Speaker LevelsCommon Functions Muting the AV ReceiverUsing Headphones Using the Sleep TimerCommon Functions Displaying Source InformationSelecting Audio Inputs Specifying the Digital Signal Format Selecting with the Remote Controller Using the Listening ModesSelecting the Listening Modes Selecting on the AV ReceiverAnalog and PCM Sources Using the Listening ModesListening Modes Available for Each Source Format Sacd DSD, Dolby Digital, and Dolby Digital Plus SourcesDTS-ES TrueHD and DTS SourcesDTS-HD Sources About the Listening Modes Use this mode with any stereo movie e.g., TV, DVD, VHSSound is output by the front left and right speakers DTS NEO6DSD Onkyo Original DSP Modes Recording from Different AV Sources RecordingRecording the Input Source Menu Map Onscreen Setup MenusMain menu SubmenuUsing the Re-EQ Function Adjusting the Listening ModesUsing the Late Night Function Tone Control Settings Adjusting the Listening ModesAudio Adjust PLIIx/Neo6 Settings Direct SettingMultiplex/Mono Settings Dolby Digital Settings Listening Mode PresetsTheater-Dimensional Setting LFE Level SettingsAudio formats supported by that input selector appear Speaker Setup Advanced SetupSpeaker Settings Buttons to select SubwooferCrossover frequency Advanced SetupDouble Bass Low-Pass Filter for the LFE ChannelSpeaker Distance Speaker Level Calibration Equalizer Settings THX Audio Setup Woofer, and use the Left Source SetupButtons to select THX Sub Name Edit IntelliVolumeSync You want to give a custom nameSatellite Radio When you’ve ﬁnished, useSirius Parental Lock Arrow Buttons To display the following screenVolume Setup Miscellaneous SetupVolume Display Maximum VolumeOSD Setup Zone 2 and Zone Hardware SetupRemote Control Analog Multich Lock Lock Setup100 Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone Zone 2 and Zone102 Connecting Your Zone 3 SpeakersZone 2 and Zone Zone 2 Video Output TX-SR875 only103 Powered Zone 2 SettingUsing Zone 2 and Zone Zone 2/Zone 3 Out SettingsThis section explains how to use Zone 2 and Zone 104105 On the remote controller, pressSelecting an Input Source for Zones Turning Off ZonesAdjusting the Tone of Zone Adjusting the Volume of Zones Muting ZonesAdjusting the Balance of Zones 106Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with Zone 2/3Using a Multiroom Kit with Other Components 107108 Entering Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected via Resetting the Remote ControllerResetting the Remote Mode Buttons 109CH +/-, TV CH + 110CH + Eject111 Learning Commands112 Using MacrosMaking Macros Running Macros113 Troubleshooting114 Troubleshooting115 116 117 SpeciﬁcationsSpeciﬁcations 118Audio Outputs Control TerminalMemo Onkyo U.S.A. Corporation 120Onkyo Europe Electronics GmbH Onkyo Europe UK Office