Onkyo SR805 instruction manual Hdmi Input Setup, Hdmi Input menu appears, Version, Out

First Time Setup—Continued

HDMI Input Setup

2 Use the Up and Down []/[ ]

4		5		6
TAPE	TUNER		CD
7		8		9
PHONO			D. TUN			TV VOL
+10		0	CLEAR
--/--- 10		11			12
INPUT SELECTOR
	MACRO
1		2		3		ZONE3
	REMOTE MODE
DVD	VCR		CD			ZONE2
			CDR/MD				1
TV	CABLE		DOCK			RECEIVER
	SAT					TAPE/AMP
DIMMER						SLEEP
2, 3		ENU	M	EN			2–4
	M				U
	OP
	T
+
CH

ENTER

ENTER

buttons to select “1. Input/Output Assign,” and then press [ENTER].

The Input/Output Assign menu appears.

	DISC				ENTER			VOL
	ALBUM
	-		G
1, 5					UIDE	IT
	PREV					EX
		S	E	TUP			N
	CH					RET
	DISPLAY							MUTING
	REC				PLAYLIST			RANDOM
		LISTENING MODE
	STEREO		SURR
	REPEAT	AUDIO				SUBTITLE		PLAY MODE
	PURE A	DIRECT				THX		ALL ST

If you connect a video component to an HDMI IN, you must assign that input to an input selector. For example, if you connect your DVD player to HDMI IN 1, you

3

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “2. HDMI Input,” and then press [ENTER].

The HDMI Input menu appears.

1-2.HDMI Input

DVD		---
VCR/DVR	---
CBL/SAT	---
GAME/TV	---
AUX1	---
AUX2	---

must assign HDMI IN 1 to the DVD input selector.

By default, none of the HDMI inputs are assigned. The following input selectors can be assigned: DVD, VCR/DVR, CBL/SAT, GAME/TV, AUX 1, AUX 2, TAPE, TUNER, CD, PHONO.

If you’ve connected your TV to the AV receiver with an HDMI cable, you can set the AV receiver so that com- posite video, S-Video, and component video sources are upconverted (*) and output by the HDMI OUT. You can set this for each input selector by selecting the “- - -” option.

Composite video, S-Video,
component video	HDMI
IN
(*)
OUT
Composite video, S-Video,	HDMI
component video

1	Press the [RECEIVER] button,
RECEIVER	followed by the [SETUP] button.
	The main menu appears onscreen.
S
E
T
UP

4 Use the Up and Down [ ]/[ ]

buttons to select an input selec- tor, and use the Left and Right

ENTER

[]/[ ] buttons to select:

IN1: Select if the video component is connected to HDMI IN 1.

IN2: Select if the video component is connected to HDMI IN 2.

IN3: Select if the video component

ENTER

is connected to HDMI IN 3. IN4: Select if the video component

is connected to HDMI IN 4. (TX-SR875 only.)

-- -:Select this to upconvert and output composite video, S-Video, and component video sources from the HDMI OUT.

5		Press the [SETUP] button.
	S	Setup closes.
	E
	T
	UP

Notes:

•Each HDMI IN cannot be assigned to more than one input selector.

•For composite video, S-Video, and component video upconversion for the HDMI OUT, the HDMI Monitor setting must be set to Yes (see page 46). See page 28 for more information on video signal flow and upcon-

version.

48