Onkyo SR805 instruction manual OSD Setup

Page 97

Advanced Setup—Continued

Power On Volume

This setting determines what the volume will be each time the AV receiver is turned on.

When the Volume Display preference is set to Absolute, the range is Last, Min, 1 to Max. When it’s set to Rela- tive, the range is Last, dB, –81 dB to +18 dB.

To use the same volume level as when the AV receiver was last turned off, select Last.

Note:

The Power On Volume setting cannot be set higher than the Maximum Volume setting.

Headphone Level

With this setting, you can offset the headphone volume relative to the main volume. This is useful if your head- phones are too loud or too quiet at the volume setting you usually use when listening through your speakers. The headphone level can be set from –12 dB to +12 dB.

Zone2 Maximum Volume

With this setting, you can limit the maximum volume for Zone 2.

When the Volume Display setting is set to Absolute, the Maximum Volume range is Off, 99 to 50. When it’s set to Relative, the range is Off, +17 dB to –32 dB. To dis- able this setting, select Off.

Zone2 Power On Volume

This setting determines what the volume will be for Zone 2 each time the AV receiver is turned on.

When the Volume Display preference is set to Absolute, the range is Last, Min, 1 to Max. When it’s set to Rela- tive, the range is Last, dB, –81 dB to +18 dB.

To use the same volume level as when the AV receiver was last turned off, select Last.

Zone3 Maximum Volume

With this setting, you can limit the maximum volume for Zone 3.

When the Volume Display setting is set to Absolute, the Maximum Volume range is Off, 99 to 50. When it’s set to Relative, the range is Off, +17 dB to –32 dB. To dis- able this setting, select Off.

Zone3 Power On Volume

This setting determines what the volume will be for Zone 3 each time the AV receiver is turned on.

When the Volume Display preference is set to Absolute, the range is Last, Min, 1 to Max. When it’s set to Rela- tive, the range is Last, dB, –81 dB to +18 dB.

To use the same volume level as when the AV receiver was last turned off, select Last.

OSD Setup

Immediate Display

This setting determines whether operation details are displayed onscreen immediately after an AV receiver function is used.

On: Displayed (default).

Off: Not displayed.

Even if On is selected, operation details are not output if the input source is connected to a COMPONENT VIDEO IN or HDMI IN.

For optimal video performance, THX recommends that Immediate Display be turned off.

Monitor Type

With this setting, you can specify the aspect ratio of your TV so that menus are displayed properly.

4:3: Select if your TV is 4:3 (default). 16:9: Select if your TV is 16:9.

Display Position

This setting determines where on the screen operation details are displayed.

Bottom: Bottom of the screen (default).

Top: Top of the screen.

TV Format

See “TV Format Setup (not North American models)” on page 60.

Language (TX-SR875 only)

This setting determines the language used for the onscreen setup menus. You can select: English, German, French, Spanish, Italian, Dutch, Swedish, or Japanese.

97

Image 97
Contents TX-SR875 TX-SR805 Avis Important Safety InstructionsPower PrecautionsFor models having a power cord with a polarized plug FCC Information for UserFor British models PrecautionsContents Features Make sure you have the following accessories Supplied AccessoriesPower cord THX Ultra2Main Room Multiroom CapabilityZone 2 Room Zone 3 Room Front Panel Getting to Know the AV ReceiverGetting to Know the AV Receiver Display Rear Panel Digital Optical in 1, 2, and OUT Digital Coaxial in 1, 2,GND screw Front L/R, CENTER, Surr L/R, and Surr Back L/R SpeakersInstalling the Batteries Remote ControllerUsing the Remote Controller About the Remote Controller Modes Remote ControllerRECEIVER/TAPE Mode Remote Mode buttons Listening Mode buttonsTape mode Standby buttonDVD Mode CD/MD/CDR Modes Dock Mode Enjoying Home Theater Connecting Your SpeakersSubwoofer Surround back left and right speakersConnecting Your Speakers Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsFully insert the bare wire Strip about 5/8Bi-amping Speaker Hookup Bi-amping the Front SpeakersBridged Speaker Hookup Bridging the Front Speakers TX-SR875 onlyConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennasConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Audio and Video Signals to the AV Receiver Connecting Your ComponentsHdmi Monitor Setting Set to Yes Which Connections Should I Use?TV, projector, etc Video Signal Flow Chart DVD player, etc Hdmi Monitor Setting Set to NoAudio Signal Flow Chart DVD player, etc Audio Connection FormatsVideo Connection Connecting a TV or ProjectorAudio Connection HintOr the other Connecting a DVD playerDVD player Hooking Up the Multichannel InputVCR or DVR Connecting a VCR or DVR for PlaybackDigital Optical OUT Connecting a VCR or DVR for RecordingSatellite, cable, set-top box, etc About Hdmi Connecting Components with HdmiSupported Audio Formats About Copyright ProtectionAudio Signals Video SignalsMaking Hdmi Connections Game Console Connecting a Game ConsoleCamcorder, etc Connecting a Camcorder or Other AV ComponentConnecting a Turntable Connecting a CD PlayerStep CD playerConnecting a Power Amplifier Connecting a Cassette, CDR, MiniDisc, or DAT RecorderPower amplifier European model Connecting an RI DockConnecting the Power Cord Connecting Onkyo ComponentsMalfunction Some components may not support all Functions WorkDo the automatic speaker setup-this is essential Set the Power switch to the on positionTurning On the AV Receiver Turning On and StandbySpeaker Settings First Time SetupHdmi Monitor Setup First Time SetupButtons to select 1. Input/Output Assign, and then press EnterButtons to select Resolution Using the Hdmi OUT ButtonCurrent setting is displayed Press the Hdmi OUT buttonHdmi Input menu appears Hdmi Input SetupVersion OUTFirst Time Setup Assign, and then press Component Video Input SetupInput/Output Assign menu AppearsChanging the Input Display These are the default assignments Digital Input SetupDigital Input menu appears Input selector Audio inputUsing the Digital Input Button Buttons to select an input selec Analog Input SetupTor Using Audyssey MultEQ XT Automatic Speaker Setup Audyssey MultEQ XTMeasurement Positions 1st measurement positionConnect it to the Setup MIC Place the setup microphone atWhen prompted, place the setup Turn on the AV receiverWhen the calculations are com Error MessagesDisconnect the setup micro Phone Plete, the following screenWriting Error Speaker Detect ErrorOne of the front speakers has not been detected One of the surround speakers has not been detectedUsing a Powered Subwoofer Changing the Speaker Settings ManuallyReviewing the Results You want to review, and thenButtons to select 6. Miscella TV Format Setup Not North American modelsNeous, and then press Enter Buttons to select TV FormatHardware Setup menu appears AM Frequency Step Setup on some modelsButtons to select 7. Hardware Buttons to select AM FreqSelect a listening mode and enjoy SettingsSee Using the Listening Modes on Playing Your AV ComponentsListening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations Listening to the Radio Tuning into Stations by FrequencyDisplaying AM/FM Radio Information Followed by the D.TUN buttonWhat is RDS? Using RDS not North American modelRDS Program Types PTY This allows you to search RDS radio stations by type seeFinding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Selecting Presets Presetting AM/FM StationsDeleting Presets Setting the Display Brightness Adjusting Speaker LevelsCommon Functions Muting the AV ReceiverUsing Headphones Using the Sleep TimerCommon Functions Displaying Source InformationSelecting Audio Inputs Specifying the Digital Signal Format Selecting with the Remote Controller Using the Listening ModesSelecting the Listening Modes Selecting on the AV ReceiverListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources Sacd DSD, Dolby Digital, and Dolby Digital Plus SourcesDTS-ES TrueHD and DTS SourcesDTS-HD Sources About the Listening Modes Use this mode with any stereo movie e.g., TV, DVD, VHSSound is output by the front left and right speakers DTS NEO6DSD Onkyo Original DSP Modes Recording the Input Source RecordingRecording from Different AV Sources Menu Map Onscreen Setup MenusMain menu SubmenuUsing the Late Night Function Adjusting the Listening ModesUsing the Re-EQ Function Audio Adjust Adjusting the Listening ModesTone Control Settings Multiplex/Mono Settings Direct SettingPLIIx/Neo6 Settings Dolby Digital Settings Listening Mode PresetsTheater-Dimensional Setting LFE Level SettingsAudio formats supported by that input selector appear Speaker Setup Advanced SetupSpeaker Settings Buttons to select SubwooferCrossover frequency Advanced SetupDouble Bass Low-Pass Filter for the LFE ChannelSpeaker Distance Speaker Level Calibration Equalizer Settings THX Audio Setup Buttons to select THX Sub Source SetupWoofer, and use the Left Name Edit IntelliVolumeSync You want to give a custom nameSatellite Radio When you’ve finished, useSirius Parental Lock Arrow Buttons To display the following screenVolume Setup Miscellaneous SetupVolume Display Maximum VolumeOSD Setup Remote Control Hardware SetupZone 2 and Zone Analog Multich 100 Lock SetupLock Connecting Your Zone 2 Speakers Directly to the AV receiver Connecting ZoneConnecting Your Zone 2 Speakers to an Amp in Zone Zone 2 and Zone102 Connecting Your Zone 3 SpeakersZone 2 and Zone Zone 2 Video Output TX-SR875 only103 Powered Zone 2 SettingUsing Zone 2 and Zone Zone 2/Zone 3 Out SettingsThis section explains how to use Zone 2 and Zone 104105 On the remote controller, pressSelecting an Input Source for Zones Turning Off ZonesAdjusting the Tone of Zone Adjusting the Volume of Zones Muting ZonesAdjusting the Balance of Zones 106Using a Multiroom Kit with a Cabinet Using a Multiroom Kit with Zone 2/3Using a Multiroom Kit with Other Components 107Controlling Other Components Entering Remote Control Codes108 Remote Control Codes for Onkyo Components Connected via Resetting the Remote ControllerResetting the Remote Mode Buttons 109CH +/-, TV CH + 110CH + Eject111 Learning Commands112 Using MacrosMaking Macros Running Macros113 Troubleshooting114 Troubleshooting115 116 117 SpecificationsSpecifications 118Audio Outputs Control TerminalMemo Onkyo U.S.A. Corporation 120Onkyo Europe Electronics GmbH Onkyo Europe UK Office