Rackmount Solutions VA 10000, VA 3000, VA 700, VA 6000, VA 20000 manual Rear, Active 700

Page 9

2.2 Rear

2.2.1 Active 700 and 1000

Selector switch - for output voltage. The selection of the output voltage must be made with the UPS switched off and unplugged.*

Selector switch Interface COM A Interface COM B (optional)

Fan

Input fuse - the fuse may only be

 

changed when the device is switched

Input fuse

off and unplugged.

Mains connection

 

 

Output receptacles

Fig. 1: Active 700 Rear View

 

Selector switch - for output voltage.

Selector switch

 

The selection of the output voltage must

Interface COM A

be made with the UPS switched off and

Interface COM B (optional)

unplugged.*

 

 

Connection for additional bat-

 

teries

Input fuse - the fuse may only be

Fan

Input fuse

changed when the device is switched off

and unplugged.

Mains (input) connection

 

 

Output receptacles

Fig. 2: Active 1000 Rear View

 

* Call Chloride Technical Services for information on setting output voltages (1-800-879-5011).

Chloride Active and E-Series UPS User Manual

5

Page 8 Page 10
Image 9
Page 8 Page 10
Contents
Page FCC Compliance Important Safety InstructionsChloride Introduction Operational Characteristics E-Series Safety Notes Technical Support and Service Active Chloride Introduction Registering your Chloride Active UPSPage Overload Load Display and Operation Elements ActiveFront Active 700 RearActive 3000 Rear View Active 2000Safety Installation and operating notesActive Rackmount Series Battery Cabinets Connection of a battery packType of Battery Packs Maximum Number of Packs Mechanical AttachmentActive700-19 Unit Rear View and Connections Active 700-19 and ActiveActive3000-19 Active 2000-19 and ActiveActive Installation and Commissioning Commissioning of an External Battery Cabinet External Battery PacksModel Cabinet Batteries Self Test Operational Characteristics Active Ready for Operation CheckBattery Operation, Inverter On Mains Failure Modes of OperationNormal Operation, Inverter On Mains Available Front Display Panel During Bypass Operation Overload 140% Bypass Operation, Inverter OFF Overload 140%Standard Interface COM a Description of the Interface ActiveOptional Interface COM B Interface COM aPin Number Condition INV Shutdown Maintenance Active CleaningStorage Troubleshooting Active TroubleshootingProblem Possible Cause Action to Take Page Chloride Active UPS North America Active Tower and Rackmount SpecificationsSignals Battery extensionUPS Model Active Mechanical DataLoad connection UPS Model Active Connections Mains connectionsOperating Data Active Rackmount Technical Data for North American ModelsTypical lifetime of the batteries Battery LifetimeRegistering your Chloride E-Series UPS Technical Support and Service E-SeriesPage Display and Operation Elements E-Series Switch for at least 1 second. a tone sounds E41 or E61 Series E61 and E101E81 or E101 Series E203Installation of the E-Series Hardwired Series Installation and CommissioningPage Lbs Awg Minimum Requirements for E-Series UPS InstallationWiring Diagram for the E101 Starting Up the E-Series Commissioning of the E-SeriesDryers, vacuum cleaners BPE61 E101 E203 Technical data of the connection cableSelf Test Modes of Operation Bypass Operation, Inverter OFF Overload 140% Description of the Interface E-Series Optional Interface COM B Series Models E153X and E203X only Emergency Power Off EPOMaintenance E-Series Troubleshooting E-Series Page Chloride E-Series UPS North America Series SpecificationsBPE101 Weight lbs 337 894 Dimensions HxWxD in. mm E101XA E203XA E41XA E81 E153XA Connections Optional Power Distribution Units Optional Power Distribution Units PDU available 4 -10 kVAChloride Power Protection
Top Page Image Contents