Rackmount Solutions VA 3000, VA 700, VA 10000, VA 6000, VA 20000 manual Optional Interface COM B

Page 49

Table 10. Interface COM A

Pin Number

Condition

 

 

SGN at pin 5

This connection point serves as a reference for all signals.

 

 

RXD at pin 2 and TXD at pin 3

In conforms standard RS232 configuration.

 

 

 

This input (pin 2: High signal +5V...+12V, > 1 second, pin 5: 0V)

INV SHUTDOWN at pin 2

enables the control processor to switch off the UPS in the event of a

mains failure. After the mains has been reestablished, the UPS

 

 

starts again independent of this signal status.

 

 

BATTERY LOW at pin 1

This output goes low, when the battery can supply current for

approximately 3 more minutes at nominal load.

 

 

 

 

Pin 9 goes low and pin 6 goes high for mains voltage failure at the

AC FAIL at pin 9 and

UPS input for a minimum of 10 seconds or when the mains voltage

AC FAIL at pin 6

moves beyond the tolerance band. The signal is reset 850 ms after

 

the mains have been reestablished.

 

 

BYPASS ACTIVE at pin 7

This signal goes low after switching over to bypass, blocking the

inverter and the energy being supplied by the mains

 

 

 

 

This output is low, when one of the alarms “BATTERY LOW”, “AC

SUM ALARM at pin 8

FAIL” or “BYPASS ACTIVE” is given.

 

 

15.2 Optional Interface COM B

The optional interface COM can be equipped with various interface cards. The designation beside the plug then depends on the type of interface card.

In the following the function of the interface signals for version COM B is described. The optional interface COM B provides potential-free signalling contacts and a shutdown input and an insulated auxiliary supply.

Fig. 34: Simplified Schematic of Interface Connections

Chloride Active and E-Series UPS User Manual

45

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Page FCC Compliance Important Safety InstructionsChloride Introduction Operational Characteristics E-Series Safety Notes Technical Support and Service ActiveChloride Introduction Registering your Chloride Active UPSPage Overload Load Display and Operation Elements ActiveFront Active 700 RearActive 3000 Rear View Active 2000Installation and operating notes SafetyActive Rackmount Series Battery Cabinets Connection of a battery packType of Battery Packs Maximum Number of Packs Mechanical AttachmentActive700-19 Unit Rear View and Connections Active 700-19 and ActiveActive3000-19 Active 2000-19 and ActiveActive Installation and Commissioning External Battery Packs Commissioning of an External Battery CabinetModel Cabinet Batteries Self Test Operational Characteristics Active Ready for Operation CheckModes of Operation Battery Operation, Inverter On Mains FailureNormal Operation, Inverter On Mains Available Front Display Panel During Bypass Operation Overload 140% Bypass Operation, Inverter OFF Overload 140%Standard Interface COM a Description of the Interface ActiveInterface COM a Optional Interface COM BPin Number Condition INV Shutdown Cleaning Maintenance ActiveStorage Troubleshooting Troubleshooting ActiveProblem Possible Cause Action to Take Page Chloride Active UPS North America Active Tower and Rackmount SpecificationsSignals Battery extensionUPS Model Active Mechanical DataLoad connection UPS Model Active Connections Mains connectionsOperating Data Active Rackmount Technical Data for North American ModelsTypical lifetime of the batteries Battery LifetimeRegistering your Chloride E-Series UPS Technical Support and Service E-SeriesPage Display and Operation Elements E-Series Switch for at least 1 second. a tone sounds E41 or E61 Series E61 and E101E81 or E101 Series E203Installation of the E-Series Hardwired Series Installation and CommissioningPage Lbs Awg Minimum Requirements for E-Series UPS InstallationWiring Diagram for the E101 Starting Up the E-Series Commissioning of the E-SeriesDryers, vacuum cleaners BPE61 E101 E203 Technical data of the connection cableSelf Test Modes of Operation Bypass Operation, Inverter OFF Overload 140% Description of the Interface E-Series Optional Interface COM B Series Models E153X and E203X only Emergency Power Off EPOMaintenance E-Series Troubleshooting E-Series Page Chloride E-Series UPS North America Series SpecificationsBPE101 Weight lbs 337 894 Dimensions HxWxD in. mm E101XA E203XA E41XA E81 E153XA Connections Optional Power Distribution Units Optional Power Distribution Units PDU available 4 -10 kVAChloride Power Protection

VA 2000, VA 10000, VA 700, VA 3000, VA 20000 specifications

Rackmount Solutions offers a versatile lineup of VA series products designed for efficient power management in data centers and server environments. The VA 1000, VA 6000, VA 20000, VA 3000, and VA 700 models cater to a variety of power needs, ensuring reliable performance and robust features tailored to different operational demands.

Starting with the VA 1000, this model is compact yet powerful, providing up to 1000VA of power capacity. It features an LCD display that offers real-time information on power status, battery life, and load levels. The VA 1000 is equipped with pure sine wave output, ensuring compatibility with sensitive electronic equipment and providing protection against power surges. The unit is designed for easy integration into existing IT frameworks, with multiple outlets to accommodate various devices.

Next in the lineup, the VA 3000 model steps up the capacity to 3000VA. This unit excels in larger environments where higher power demands are common. It too features pure sine wave output and includes advanced battery management technology that optimizes performance and prolongs battery life. Its networking capabilities allow for remote management and monitoring through a web interface, providing IT managers with comprehensive control over their power infrastructure.

The VA 6000 doubles down on capacity, supporting robust applications with its 6000VA rating. It is equipped with advanced features such as surge protection, automatic voltage regulation, and a high-efficiency design that reduces energy consumption. Its modular design allows for ease of maintenance and upgrades, making it a cost-effective solution over time for growing data centers.

For the larger setups, the VA 20000 model stands out with a staggering 20000VA power capacity. Designed for high-demand applications, this unit incorporates features like redundancy and N+1 configurations to ensure uninterrupted power supply. Its scalable architecture makes it suitable for both small and large enterprises looking to future-proof their power infrastructure.

Lastly, the VA 700 model serves as an entry-level solution at 700VA. Ideal for small servers and networking devices, it offers essential features like battery monitoring and basic surge protection, making it a cost-effective choice for small business environments.

In summary, the Rackmount Solutions VA series, comprising models VA 1000, VA 3000, VA 6000, VA 20000, and VA 700, collectively offer a comprehensive suite of power management solutions. Their scalable designs, advanced technologies, and focus on efficiency make them ideal for a wide range of applications, from small offices to large data centers, ensuring reliability and performance in critical environments.
Top Page Image Contents