Planar PR9030 user manual Displays and configures network settings, Dhcp on, Dhcp OFF

Page 17

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

3.1.3 Network Settings

Displays and configures network settings.

			Item	Description

	IP Configuration			Configures network settings.
		DHCP ON		Enables DHCP.
		DHCP OFF		Disables DHCP.
			IP Address	Configures the IP address when DHCP is disabled.
			Subnet Mask	Configures the subnet mask when DHCP is disabled.
			Default Gateway	Configures the default gateway when DHCP is disabled.
				Configures the name of the projector.
	Projector Name			The length of the Projector Name can be up to 64
	Projector Name			alphanumeric characters. Only alphabets, numbers and
				following symbols can be used. !"#$%&'()*+,-./:;<=>?@
				[\]^_`{}~ and space
				Configures the location to be referred to when using SNMP.
	sysLocation (SNMP)			The length of the sysLocation can be up to 255 alphanumeric
	sysLocation (SNMP)			characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

				be used.
				Configures the contact information to be referred to when
	sysContact (SNMP)			using SNMP.
	sysContact (SNMP)			The length of the sysContact can be up to 255 alphanumeric
				characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can
				be used.
	DNS Server Address			Configures the DNS server address.

Click [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

15

Image 17

Contents PR9030 LCD Projector Page Web control Thank you for purchasing this projectorMY Image Still Image Transfer Display Trademark acknowledgmentEquipment connection and network setting Content Main functionsConfiguring and controlling the projector via a web browser Management with Web browser softwareMY Image Still image Transfer Display Configuring and controlling via a web browserRequired equipment preparation Network settings Manual network connection settingEquipments connection Open Network Connections. .2.2.bSet IP address, subnet mask and default gateway for PC Manual network connection settingFor example About IP address Setting manuallySetting automatically Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowProjector Management using Snmp Configuring and Controlling the Projector via a Web BrowserCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordDhcp Network InformationDhcp OFF Displays and configures network settingsDhcp on Click Apply button to save the settings Port SettingsDisplays and configures communication port settings Displays and configures e-mail addressing settings Mail SettingsPortion has become heated Alert SettingsDisplays and configures failure & alert settings Alert Items are shown below Displays and configures schedule settings Schedule SettingsDescription Schedule Schedule settings are shown belowDate Month/Day Data First, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Sntp Time differenceSntp Server IP AddressSecurity Settings Snmp Configures the community name if Snmp is usedProjector Control Selects the Hdmi setting Selects the 3D-YCS setting3D-YCS HdmiSRS WOW Is detected Displays the current projector status Projector StatusNetwork Restart When Logoff is clicked, the Logon menu is displayed. 13Restarts the projector’s network connection LogoffMail Alerts Mail Settings 17Mail Alerts Snmp Settings 16 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 20Date/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Communication Port Command Control via the NetworkCommand Control Settings 16 Command Control via the Network Reply Error code Command FormatHeader Data length RS-232C command Check Sum Connection Send Data formatReply Data format Automatic Connection Break AuthenticationPlanar Systems, Inc