Planar PR9030 user manual Time difference, Sntp Server IP, Address, Cycle

Page 25

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

		Item	Description

	Time difference		Configures the time difference. Set the same time difference
	Time difference		as the one set on your PC. If unsure, consult your IT
			manager.
	SNTP		Click the [ON] check box to retrieve Date and Time
	SNTP		information from the SNTP server and set the following items.

			Configures the SNTP server address in IP format.
		SNTP Server IP	• The address allows not only IP address but also domain
		SNTP Server IP	name if the valid DNS server is setup in the Network
		Address	name if the valid DNS server is setup in the Network
		Address	Settings. The maximum length of host or domain name is up
			Settings. The maximum length of host or domain name is up
			to 255 characters.
		Cycle	Configures the interval at which to retrieve Date and Time
		Cycle	information from the SNTP server (hour:minute).
			information from the SNTP server (hour:minute).

Click [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu.

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•To enable the SNTP function, the time difference must be set.

•The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled.

•The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

23

Image 25

Contents PR9030 LCD Projector Page Web control Thank you for purchasing this projectorMY Image Still Image Transfer Display Trademark acknowledgmentEquipment connection and network setting Content Main functionsConfiguring and controlling the projector via a web browser Management with Web browser softwareMY Image Still image Transfer Display Configuring and controlling via a web browserRequired equipment preparation Network settings Manual network connection settingEquipments connection Open Network Connections. .2.2.bSet IP address, subnet mask and default gateway for PC Manual network connection settingSetting automatically About IP address Setting manuallyFor example Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowProjector Management using Snmp Configuring and Controlling the Projector via a Web BrowserCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordDhcp Network InformationDhcp on Displays and configures network settingsDhcp OFF Displays and configures communication port settings Port SettingsClick Apply button to save the settings Displays and configures e-mail addressing settings Mail SettingsDisplays and configures failure & alert settings Alert SettingsPortion has become heated Alert Items are shown below Displays and configures schedule settings Schedule SettingsDescription Schedule Schedule settings are shown belowDate Month/Day Data Displays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Sntp Time differenceSntp Server IP AddressSecurity Settings Snmp Configures the community name if Snmp is usedProjector Control Selects the Hdmi setting Selects the 3D-YCS setting3D-YCS HdmiSRS WOW Is detected Displays the current projector status Projector StatusNetwork Restart When Logoff is clicked, the Logon menu is displayed. 13Restarts the projector’s network connection LogoffMail Alerts Mail Settings 17Mail Alerts Snmp Settings 16 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 20Date/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control Settings 16 Command Control via the NetworkCommunication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232C command Check Sum Connection Send Data formatReply Data format Automatic Connection Break AuthenticationPlanar Systems, Inc