Planar PR9030 user manual Logon, Password

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

3.1.1 Logon

Refer to the following for configuring or controlling the projector via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser and press “Enter” key or click “” button. The screen in Fig. 3.1.1a will be displayed.

2)Enter your ID and password and click

[Logon].

Fig. 3.1.1 a “Logon Menu”

Below are the factory default settings for Administrator ID, User ID and passwords.

Item	ID	Password
Administrator	Administrator	<blank>
User	User	<blank>

If the logon is successful, either the Fig. 3.1.1 b or Fig. 3.1.1 c screen will be displayed.

Main menu Main menu

Fig. 3.1.1 b “Logon with Administrator ID” Fig. 3.1.1 c “Logon with User ID”

3)Click the desired operation or configuration item on the main menu located on the left-hand side of the screen.

13