Planar PR9030 user manual Projector Control

Page 28

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

3.1.10 Projector Control

The items shown in the table below can be performed using the Projector Control menu. Select an item using the up and down arrow keys on the PC.

Most of the items have a submenu. Refer to the table below for details.

NOTE • The setting value may not match with the actual value if the user changes the value manually. In that case, please refresh the page by clicking [Refresh] button.

Controls the projector.

	Item	Description

Main
	Power	Turns the power on/off.
	Input Source	Selects the input source.
	Picture Mode	Selects the picture mode setting.
	Blank On/Off	Turns Blank on/off.
	Mute	Turns Mute on/off.
	Freeze	Turns Freeze on/off.
	Magnify	Controls the magnify setting.
	Magnify	In some input signal sources, it might stop “Magnify” even
		though it does not reach to maximum setting value.
Picture
	Brightness	Adjusts the brightness setting.
	Contrast	Adjusts the contrast setting.
	Gamma	Selects the gamma setting.
	Color Temp	Selects the color temperature setting.
	Color	Adjusts the color setting.
	Tint	Adjusts the tint setting.
	Sharpness	Adjusts the sharpness setting.
	Active Iris	Selects the active iris setting.
	MyMemory Save	Saves the MyMemory data.
	MyMemory Recall	Recalls the MyMemory data.

26

Image 28

Contents PR9030 LCD Projector Page Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Trademark acknowledgmentContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Management with Web browser softwareConfiguring and controlling via a web browser MY Image Still image Transfer DisplayRequired equipment preparation Manual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for PCSetting automatically About IP address Setting manuallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonNetwork Information DhcpDhcp on Displays and configures network settingsDhcp OFF Displays and configures communication port settings Port SettingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsDisplays and configures failure & alert settings Alert SettingsPortion has become heated Alert Items are shown below Schedule Settings Displays and configures schedule settingsSchedule settings are shown below Description ScheduleDate Month/Day Data Displays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Time difference SntpSntp Server IP AddressSecurity Settings Configures the community name if Snmp is used SnmpProjector Control Selects the 3D-YCS setting Selects the Hdmi setting3D-YCS HdmiSRS WOW Is detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 13 Network RestartRestarts the projector’s network connection LogoffMail Settings 17 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 16Event Scheduling Schedule Settings 20 Event SchedulingDate/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control Settings 16 Command Control via the NetworkCommunication Port Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection Send Data formatReply Data format Authentication Automatic Connection BreakPlanar Systems, Inc