Planar PR9030 user manual Mail Settings, Displays and configures e-mail addressing settings

Page 19

3.Management with Web browser software

3.1Configuring and controlling the projector via a web browser (continued)

3.1.5 Mail Settings

Displays and configures e-mail addressing settings.

Item	Description

Send mail	Click [Enable] check box to use the e-mail function.
Send mail	Configure the conditions for sending e-mail under the Alert
	Settings.
	Configures the address of the mail server in IP format.
	• The address allows not only IP address but also domain
SMTP Server IP Address	name if the valid DNS server is setup in the Network
	Settings. The maximum length of host or domain name is up
	to 255 characters.
Sender E-mail address	Configures the sender e-mail address.
Sender E-mail address	The length of the sender e-mail address can be up to 255
	alphanumeric characters.
	Configures the e-mail address of up to five recipients. You
Recipient E-mail address	can also specify [TO] or [CC] for each address. The length of
	the recipient e-mail address can be up to 255 alphanumeric
	characters.

Click [Apply] button to save the settings.

NOTE • You can confirm whether the mail settings work correctly using [Send Test Mail] button. Please enable Send mail setting before clicking [Send Test Mail].

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

17

Image 19

Contents PR9030 LCD Projector Page Trademark acknowledgment Thank you for purchasing this projectorWeb control MY Image Still Image Transfer DisplayManagement with Web browser software Content Main functionsEquipment connection and network setting Configuring and controlling the projector via a web browserMY Image Still image Transfer Display Configuring and controlling via a web browserRequired equipment preparation Open Network Connections. .2.2.b Manual network connection settingNetwork settings Equipments connectionSet IP address, subnet mask and default gateway for PC Manual network connection settingSetting automatically About IP address Setting manuallyFor example Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowMail Alerts Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Command Control via the NetworkConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordDhcp Network InformationDhcp on Displays and configures network settingsDhcp OFF Displays and configures communication port settings Port SettingsClick Apply button to save the settings Displays and configures e-mail addressing settings Mail SettingsDisplays and configures failure & alert settings Alert SettingsPortion has become heated Alert Items are shown below Displays and configures schedule settings Schedule SettingsData  Schedule settings are shown belowDescription Schedule Date Month/DayDisplays and configures the date and time settings Date/Time SettingsFirst, 2, 3, 4, Last Address Time differenceSntp Sntp Server IPSecurity Settings Snmp Configures the community name if Snmp is usedProjector Control Hdmi Selects the 3D-YCS settingSelects the Hdmi setting 3D-YCSSRS WOW Is detected Displays the current projector status Projector StatusLogoff When Logoff is clicked, the Logon menu is displayed. 13Network Restart Restarts the projector’s network connectionMail Alerts Mail Settings 17Mail Alerts Snmp Settings 16 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 20Date/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control Settings 16 Command Control via the NetworkCommunication Port Command Control via the Network Send Data format Command FormatReply Error code Header Data length RS-232C command Check Sum ConnectionReply Data format Automatic Connection Break AuthenticationPlanar Systems, Inc