Planar PR9030 user manual About IP address Setting manually, For example, Setting automatically

Page 9

2.Equipment connection and network setting

2.2Manual network connection setting (continued)

[About IP address] ■ Setting manually

The Network address portion included in the IP address set into your PC should be common with projector’s one. And the entire IP address in the PC should not be overlapped with other equipments in the same network, including the projector.

For example

The projector’s initial settings are as follows.

IP address: 192.168.1.10

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Therefore, specify PC’s IP address as follows.

IP address: 192.168.1.xxx (xxx shows decimal number.)

Subnet mask: 255.255.255.0

(Network address: 192.168.1 in this case)

Select from 1 to 254 for “xxx” not duplicating with any other equipments. In this case, projector has “192.168.1.10” IP address, specify from 1 to 254 except 10 for PC.

NOTE • “0.0.0.0” cannot be set to the IP address.

•The projector’s IP address can be changed by using the configuration utility via a web browser. (&11)

•If the projector and PC exist in the same network (i.e. network address is common), default gateway can be blank.

•When the projector and PC exist in different networks, default gateway setting is necessary. Contact the network administrator in detail.

■Setting automatically

When DHCP server exists in network, it is possible to assign IP address to the projector and PC automatically.

*DHCP is abbreviation for “Dynamic Host Configuration Protocol” and has the function to provide necessary setting for network like IP address from server to client. A server that has DHCP function is called DHCP server.

7

Image 9

Contents PR9030 LCD Projector Page Web control Thank you for purchasing this projectorMY Image Still Image Transfer Display Trademark acknowledgmentEquipment connection and network setting Content Main functionsConfiguring and controlling the projector via a web browser Management with Web browser softwareMY Image Still image Transfer Display Configuring and controlling via a web browserRequired equipment preparation Network settings Manual network connection settingEquipments connection Open Network Connections. .2.2.bSet IP address, subnet mask and default gateway for PC Manual network connection settingAbout IP address Setting manually Setting automaticallyFor example Click Internet Option settingCheck connection 3.c Local Area Network LAN Settings windowProjector Management using Snmp Configuring and Controlling the Projector via a Web BrowserCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Logon PasswordDhcp Network InformationDisplays and configures network settings Dhcp onDhcp OFF Port Settings Displays and configures communication port settingsClick Apply button to save the settings Displays and configures e-mail addressing settings Mail SettingsAlert Settings Displays and configures failure & alert settingsPortion has become heated Alert Items are shown below Displays and configures schedule settings Schedule SettingsDescription Schedule Schedule settings are shown belowDate Month/Day Data Date/Time Settings Displays and configures the date and time settingsFirst, 2, 3, 4, Last Sntp Time differenceSntp Server IP AddressSecurity Settings Snmp Configures the community name if Snmp is usedProjector Control Selects the Hdmi setting Selects the 3D-YCS setting3D-YCS HdmiSRS WOW Is detected Displays the current projector status Projector StatusNetwork Restart When Logoff is clicked, the Logon menu is displayed. 13Restarts the projector’s network connection LogoffMail Alerts Mail Settings 17Mail Alerts Snmp Settings 16 Projector Management using SnmpEvent Scheduling Event Scheduling Schedule Settings 20Date/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control via the Network Command Control Settings 16Communication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232C command Check Sum Connection Send Data formatReply Data format Automatic Connection Break AuthenticationPlanar Systems, Inc