Planar PR9030 user manual Projector Management using Snmp, Snmp Settings 16

Page 36

3. Management with Web browser software

3.3 Projector Management using SNMP

The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function.

NOTE • It is recommended that SNMP functions be carried out by a network administrator.

•SNMP management software must be installed on the computer to monitor the projector via SNMP.

SNMP Settings (16)

Configure the following items via a web browser to use SNMP. Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and Password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open the SNMP Port. Set the IP address to send the SNMP trap to when a Failure/Warning occurs.

NOTE • A Network Restart is required after the SNMP Port configuration settings have been changed. Click [Network Restart] and configure the following items.

5)Click [Security Settings] on the main menu.

6)Click [SNMP] and set the community name on the screen that is displayed.

NOTE • A Network Restart is required after the Community name has been changed. Click [Network Restart] and configure the following items.

7)Configure the settings for Trap transmission of Failures/Warnings. Click

[Alert Settings] on the main menu and select the Failure/Warning item to be configured.

8)Click [Enable] check box to send out the SNMP trap for Failures/Warnings. Clear [Enable] check box when SNMP trap transmission is not required.

9)Click [Apply] button to save the settings.

34

Image 36

Contents PR9030 LCD Projector Page Thank you for purchasing this projector Web controlMY Image Still Image Transfer Display Trademark acknowledgmentContent Main functions Equipment connection and network settingConfiguring and controlling the projector via a web browser Management with Web browser softwareConfiguring and controlling via a web browser MY Image Still image Transfer DisplayRequired equipment preparation Manual network connection setting Network settingsEquipments connection Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for PCAbout IP address Setting manually Setting automaticallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionConfiguring and Controlling the Projector via a Web Browser Projector Management using SnmpCommand Control via the Network Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonNetwork Information DhcpDisplays and configures network settings Dhcp onDhcp OFF Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsAlert Settings Displays and configures failure & alert settingsPortion has become heated Alert Items are shown below Schedule Settings Displays and configures schedule settingsSchedule settings are shown below Description ScheduleDate Month/Day Data Date/Time Settings Displays and configures the date and time settingsFirst, 2, 3, 4, Last Time difference SntpSntp Server IP AddressSecurity Settings Configures the community name if Snmp is used SnmpProjector Control Selects the 3D-YCS setting Selects the Hdmi setting3D-YCS HdmiSRS WOW Is detected Projector Status Displays the current projector statusWhen Logoff is clicked, the Logon menu is displayed. 13 Network RestartRestarts the projector’s network connection LogoffMail Settings 17 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 16Event Scheduling Schedule Settings 20 Event SchedulingDate/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control via the Network Command Control Settings 16Communication Port Command Control via the Network Command Format Reply Error codeHeader Data length RS-232C command Check Sum Connection Send Data formatReply Data format Authentication Automatic Connection BreakPlanar Systems, Inc