Planar PR9030 Command Control via the Network, Communication Port, Command Control Settings 16

Page 42

3. Management with Web browser software

3.6 Command Control via the Network

You can configure and control the projector via the network using RS-232C commands.

Communication Port

The following two ports are assigned for the command control. TCP #23

TCP #9715

NOTE • Command control is not available via communication port (TCP #9716) (16) that is used for the MY IMAGE transmission function.

Command Control Settings (16)

Configure the following items from a web browser when command control is used.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Port Settings] on the main menu.

4)Click [Enable] check box to open Network Control Port1 (Port: 23) to use TCP #23. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box.

5)Click [Enable] check box to open Network Control Port2 (Port: 9715) to use TCP #9715. Click [Enable] check box for [Authentication] setting when authentication is required, otherwise clear the check box.

6)Click [Apply] button to save the settings.

40

Image 42

Contents PR9030 LCD Projector Page MY Image Still Image Transfer Display Thank you for purchasing this projectorWeb control Trademark acknowledgmentConfiguring and controlling the projector via a web browser Content Main functionsEquipment connection and network setting Management with Web browser softwareConfiguring and controlling via a web browser MY Image Still image Transfer DisplayRequired equipment preparation Equipments connection Manual network connection settingNetwork settings Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for PCAbout IP address Setting manually Setting automaticallyFor example Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionCommand Control via the Network Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonNetwork Information DhcpDisplays and configures network settings Dhcp onDhcp OFF Port Settings Displays and configures communication port settingsClick Apply button to save the settings Mail Settings Displays and configures e-mail addressing settingsAlert Settings Displays and configures failure & alert settingsPortion has become heated Alert Items are shown below Schedule Settings Displays and configures schedule settingsDate Month/Day Schedule settings are shown belowDescription Schedule Data Date/Time Settings Displays and configures the date and time settingsFirst, 2, 3, 4, Last Sntp Server IP Time differenceSntp AddressSecurity Settings Configures the community name if Snmp is used SnmpProjector Control 3D-YCS Selects the 3D-YCS settingSelects the Hdmi setting HdmiSRS WOW Is detected Projector Status Displays the current projector statusRestarts the projector’s network connection When Logoff is clicked, the Logon menu is displayed. 13Network Restart LogoffMail Settings 17 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 16Event Scheduling Schedule Settings 20 Event SchedulingDate/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Command Control via the Network Command Control Settings 16Communication Port Command Control via the Network Header Data length RS-232C command Check Sum Connection Command FormatReply Error code Send Data formatReply Data format Authentication Automatic Connection BreakPlanar Systems, Inc