Planar PR9030 user manual Event Scheduling, Schedule Settings 20

Page 38

3.Management with Web browser software

3.4Event Scheduling (continued)

Schedule Settings (20)

Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser.

2)Enter the Administrator ID and password and click [Logon].

3)Click [Schedule Settings] on the main menu and select the required schedule item. For example, if you want to perform the command every Sunday, please select [Sunday].

4)Click [Enable] check box to enable scheduling.

5)Enter the date (month/day) for specific date scheduling.

6)Click [Apply] button to save the settings.

7)After configure the time, command and parameters, click [Register] to add the new event.

8)Click [Delete] button when you want to delete a schedule.

There are three types of scheduling.

1)Daily: Perform the specified operation at a specified time every day.

2)Sunday ~ Saturday: Perform the specified operation at the specified time on a specified day of the week.

3)Specific date: Perform the specified operation on the specified date and time.

NOTE • In Standby mode the power indicator will flash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved.

•When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ ]. The schedule function does not work when the power switch is turned off, [O] or the breaker in a room is tripped. The power indicator will lights orange or green when the projector gets is receiving the power.

36

Image 38

Contents PR9030 LCD Projector Page MY Image Still Image Transfer Display Thank you for purchasing this projectorWeb control Trademark acknowledgmentConfiguring and controlling the projector via a web browser Content Main functionsEquipment connection and network setting Management with Web browser softwareConfiguring and controlling via a web browser MY Image Still image Transfer DisplayRequired equipment preparation Equipments connection Manual network connection settingNetwork settings Open Network Connections. .2.2.bManual network connection setting Set IP address, subnet mask and default gateway for PCFor example About IP address Setting manuallySetting automatically Internet Option setting Click3.c Local Area Network LAN Settings window Check connectionCommand Control via the Network Configuring and Controlling the Projector via a Web BrowserProjector Management using Snmp Mail AlertsConfiguring and controlling the projector via a web browser Configuring and controlling the projector via a web browser Password LogonNetwork Information DhcpDhcp OFF Displays and configures network settingsDhcp on Click Apply button to save the settings Port SettingsDisplays and configures communication port settings Mail Settings Displays and configures e-mail addressing settingsPortion has become heated Alert SettingsDisplays and configures failure & alert settings Alert Items are shown below Schedule Settings Displays and configures schedule settingsDate Month/Day Schedule settings are shown belowDescription Schedule Data First, 2, 3, 4, Last Date/Time SettingsDisplays and configures the date and time settings Sntp Server IP Time differenceSntp AddressSecurity Settings Configures the community name if Snmp is used SnmpProjector Control 3D-YCS Selects the 3D-YCS settingSelects the Hdmi setting HdmiSRS WOW Is detected Projector Status Displays the current projector statusRestarts the projector’s network connection When Logoff is clicked, the Logon menu is displayed. 13Network Restart LogoffMail Settings 17 Mail AlertsMail Alerts Projector Management using Snmp Snmp Settings 16Event Scheduling Schedule Settings 20 Event SchedulingDate/Time Settings 22 Still Image Transfer MY Image Still Image Transfer Display Communication Port Command Control via the NetworkCommand Control Settings 16 Command Control via the Network Header Data length RS-232C command Check Sum Connection Command FormatReply Error code Send Data formatReply Data format Authentication Automatic Connection BreakPlanar Systems, Inc