Mitsubishi Electronics HC7800DW user manual Network menu

Menu operation (continued)

NETWORK menu

opt. opt.

NETWORK			NETWORK
	PROJECTOR		IP CONFIG
	NAME
	NETWORK	OK		DHCP	ON
	PASSWORD
	IP CONFIG	OK		IP ADDRESS	0. 0. 0. 0
	PJLink	ON		SUBNET MASK	0. 0. 0. 0
	CERTIFICATION
	NETWORK RESET	OK		DEFAULT	0. 0. 0. 0
				GATEWAY
				MAC ADDRESS	XX-XX-XX-XX-XX-XX

ITEM	SETTING		FUNCTION
PROJECTOR NAME	xxxxx...		Displays PROJECTOR NAME. Displays PROJECTOR NAME in
			blank when PROJECTOR NAME is not set. (See page 44.)
	SET		Set the name to identify the projector. Enter up to 15 characters
			(alphabets or numeric characters). (See page 44.)
NETWORK PASSWORD	OK		Set the password for Web control or PJLink certification. (See
			page 44.)
IP CONFIG	OK		Select this setting for IP Configuration. (See page 45.)
DHCP	ON	/ OFF	Use this setting when you obtain IP CONFIG automatically by
			DHCP server.
IP ADDRESS	xxx. xxx. xxx. xxx		Displays IP ADDRESS. However, IP ADDRESS is not set as factory
			default, and cannot be displayed.
	SET		Set IP ADDRESS. When DHCP is set to ON, you cannot change
			this setting.
SUBNET MASK	xxx. xxx. xxx. xxx		Displays SUBNET MASK. However, SUBNET MASK is not set as
			factory default, and cannot be displayed.
	SET		Set SUBNET MASK. When DHCP is set to ON, you cannot change
			this setting.
DEFAULT GATEWAY	xxx. xxx. xxx. xxx		Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
			not set as factory default, and cannot be displayed.
	SET		Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot
			change this setting.
MAC ADDRESS	xx-xx-xx-xx-xx-xx		Displays MAC ADDRESS.
PJLink CERTIFICATION	ON	/ OFF	Select whether to enable the PJLink certification or not. Select ON
			for normal use. (See page 46.)
NETWORK RESET	OK		Resets the Network Setting. (See page 46.)

EN-35