Menu operation (continued)
INFORMATION menu
opt. |
INFORMATION
|
|
|
|
|
| 0 H |
|
|
|
|
|
|
| LAMP TIME(LOW) |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| INPUT | COMPUTER |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| RESOLUTION | 1024X768 |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VERTICAL | 75.04 Hz |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| FREQUENCY |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| HORIZONTAL | 60.02 KHz |
|
|
|
|
|
|
| FREQUENCY |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| R G | B |
|
|
| |
|
|
| H V |
| SYNC. TYPE | 5wire |
|
|
|
|
|
|
|
|
|
|
|
ITEM | DESCRIPTION |
|
|
| ||||
LAMP TIME(LOW) | This item shows a lamp operating time (hour) calculated based on that LAMP MODE | |||||||
| is LOW. |
|
|
|
|
| ||
•When the LAMP MODE is STANDARD, this item shows a longer lamp operating time than the actual time. (See page 48 for the interval of lamp replacement. )
•When the lamp operating time is 0 to 10 hours, “0H” is displayed. The lamp operating time exceeding 10 hours is indicated by the actual hours.
•When the lamp operating time reaches 3750 hours, the bar turns to yellow. When
| it reaches 4750 hours, the bar turns to red. |
INPUT | Indicates the name of the terminal to which the currently projected video signal is |
| being input. |
RESOLUTION | Indicates the resolution of the currently projected video signal. |
VERTICAL FREQUENCY | Indicates the vertical frequency of the currently projected video signal. |
HORIZONTAL FREQUENCY | Indicates the horizontal frequency of the currently projected video signal. |
SYNC. TYPE | Indicates the type of the sync signal for the currently projected video signal. |
Adjusting projected images
AV memory
In addition to the default picture modes (CINEMA, VIDEO, and 3D), you can use up to 3 patterns of customized picture quality settings that are stored for each input source.
• For details about the picture quality settings you can store, see page 30.
To store the settings:
1.Select PICTURE MODE in the IMAGE menu.
2.Press the t or u button to select AV MEMORY (1, 2 or 3) to store the settings.
3.Make the picture quality settings in the IMAGE menu as desired.
4.Select PICTURE MODE again.
5.Press the ENTER button.
•A dialog box confirming you want to store the settings appears.
6.Press the ENTER button.
•The settings you made are stored.
To enable the stored image quality settings:
1. Press the AV MEMORY button to call up the stored setting.
•When you call up the stored settings and make changes to them, the changes remain effective. However, they aren’t saved to the AV MEMORY unless you perform the procedure for saving them to the AV MEMORY.
•When the input source is changed, the AV memory setting selected just before is automatically selected.
•When RESET ALL in the FEATURE menu is selected, all the settings of the AV memory are cleared.